Try Our New Website. Click Here * Under Construction *


Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!


Now We Have Lutron RA2 Select System in Stock Call or E-Mail for a quote

Please E-mail All Your Quote Requests to

[email protected]


15FT 15ft,4" Square Straight Steel -11Ga

AV Poles AVPL-SSS-15-4-11-STD-FINISH 15FT 15ft,4" Square Straight Steel -11Ga
AV Poles AVPL-SSS-15-4-11-STD-FINISH 15FT 15ft,4" Square Straight Steel -11Ga
Item# AVPOLE15
Click here to request a quote  or E-mail us at [email protected]

AV Poles AVPL-SSS-15-4-11-STD-FINISH 15FT 15ft,4" Square Straight Steel -11Ga
AVPL SSS 4" - Square Straight Steel Series - 11 Ga. (.120 Standard Wall)
SHAFT: Commercial-quality, hot-rolled, carbon steel tubing with a minimum yield strength of 48,000 PSI, conforms to ASTM A500 grade A.
ANCHOR BASE: Fabricated from hot-rolled carbon steel plate conforming to ASTM A36 meets or exceeds minimum yield strength of 36,000 PSI. All welds shall conform to AWS D1.1. Base plate and shaft is circumferentially welded top and bottom.
ANCHOR BOLTS: Fabricated from hot-rolled carbon steel bar with minimum yield strength of 55,000 PSI. Bolt are fully galvanized and conform to ASTM-F1554 A55. Each bolt is furnished with two hex nuts and two flat washers.
BASE BOLT COVER: Two-piece standard full base cover is fabricated from heavy gauge quality carbon steel and pretreated with corrosion inhibitors. Provided with S304 stainless steel hardware. Spun and cast aluminum covers are available.
GROUNDING: Provision; 3/8-16 Threaded stud welded to inner shaft wall opposite hand hole. Flat washer and hex nut provided.
HAND HOLE: Reinforced 3" x 5" hand hole is located 18" above base. Cover and attachment hardware provided.
HARDWARE: S304 stainless steel
TOP CAP: Removable top cap provided with drill-mount poles
FINISH: TGIC thermoset polyester powder coat finish is electrostatically applied at a 3.0 mil nominal thickness. A five stage metal pretreatment process and sealer provide maximum corrosion resistance. The powder top coat is baked in excess of 400 degrees for supreme endurance.
Pole Height: 15'
Shaft Size: 4"
Wall Gauge: 11Ga
Bolt Circle: 9"
Anchorage: 3/4" x 18" x 3"