Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
4" Non-Insulated Ceiling Low Voltage Recessed Housing
 "HALO H1499T75 4\" Non-Insulated Ceiling Low Voltage Recessed Housing MR16")
HALO H1499T75
The H1499T75 is a small aperture low voltage housing for providing accent and task lighting with up to 75W 12V MR16 lamps.
� The H1499T75 is designed for use in non-insulated ceiling or for insulated ceilings but insulation MUST be kept 3" from all sides of the housing.
A. . .Housing
� Die-stamped 20 gauge CRS with white powder coat finish.
B . . .Plaster Frame
� Housing is secured in plaster frame with spring barbs and can be adjusted in the plaster frame to adjust for different ceiling materials. The housing can be removed from the plaster frame to provide access to the junction box. Galvanized steel construction.
Plaster frame features include:
� Regressed locking screw for securing hanger bars
� Cutouts for easily crimping hanger bars in position
� Halo name embossed on plaster frame
C . . .Junction Box
� Listed for through branch circuit wiring
� Positioned to accommodate straight conduit runs
� Seven 1/2" trade size conduit knockouts with true pry-out slots
� Slide-N-Side� wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wider range of nonmetallic sheathed cable
� � the standard cable types used in lighting for both U.S. and Canada.
� � Allows wiring connections to be made outside the junction box
� � Simply insert the cable directly into the trap after connections are made
� � accommodates the following standard non-metallic sheathed cable types:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
D. . .GOT NAIL! Pass-N-Thru� Bar Hangers
Bar Hanger Features include:
� Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams
� Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.
� Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails
� Housing can be positioned at any point within 24" joist span
� Score lines allow "tooless" shortening for 12" joists
� Bar hangers may be repositioned 90�
� Bar hangers do not need to be removed from frame for shortening
� Integral T-bar clips snaps onto T-bars - no additional clips required
E . . .Transformer
� Integral 120V-277V dual tap magnetic transformer steps line voltage down to lamp operating voltage.
F . . .Thermal Protector
� Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation.
Labels
� UL/cUL Listed for Damp Location
� UL/cUL listed for Feed Through
� IP Rated
The H1499T75 is a small aperture low voltage housing for providing accent and task lighting with up to 75W 12V MR16 lamps.
� The H1499T75 is designed for use in non-insulated ceiling or for insulated ceilings but insulation MUST be kept 3" from all sides of the housing.
A. . .Housing
� Die-stamped 20 gauge CRS with white powder coat finish.
B . . .Plaster Frame
� Housing is secured in plaster frame with spring barbs and can be adjusted in the plaster frame to adjust for different ceiling materials. The housing can be removed from the plaster frame to provide access to the junction box. Galvanized steel construction.
Plaster frame features include:
� Regressed locking screw for securing hanger bars
� Cutouts for easily crimping hanger bars in position
� Halo name embossed on plaster frame
C . . .Junction Box
� Listed for through branch circuit wiring
� Positioned to accommodate straight conduit runs
� Seven 1/2" trade size conduit knockouts with true pry-out slots
� Slide-N-Side� wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wider range of nonmetallic sheathed cable
� � the standard cable types used in lighting for both U.S. and Canada.
� � Allows wiring connections to be made outside the junction box
� � Simply insert the cable directly into the trap after connections are made
� � accommodates the following standard non-metallic sheathed cable types:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
D. . .GOT NAIL! Pass-N-Thru� Bar Hangers
Bar Hanger Features include:
� Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams
� Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.
� Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails
� Housing can be positioned at any point within 24" joist span
� Score lines allow "tooless" shortening for 12" joists
� Bar hangers may be repositioned 90�
� Bar hangers do not need to be removed from frame for shortening
� Integral T-bar clips snaps onto T-bars - no additional clips required
E . . .Transformer
� Integral 120V-277V dual tap magnetic transformer steps line voltage down to lamp operating voltage.
F . . .Thermal Protector
� Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation.
Labels
� UL/cUL Listed for Damp Location
� UL/cUL listed for Feed Through
� IP Rated
Accessories
 |  |  |
 |  |  |
 |  |  |
 |  |  |
