Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
4" Non Insulated Ceiling Low Voltage Recessed Housing
 "HALO H1499T 4\" Non Insulated Ceiling Low Voltage Recessed Housing MR16")
HALO H1499T
The H1499T is a small aperture low voltage housing for providing accent and task lighting. The H1499T is designed for use in noninsulated ceiling or for insulated ceilings but insulation MUST be kept 3" from all sides of the housing.
A. . .Housing
� Die-stamped 20 gauge CRS with white powder coat finish.
B . . .Plaster Frame
� Galvanized steel construction. The housing can be removed from plaster frame to provide access to the junction box.
Plaster frame features include:
� Regressed locking screw for securing hanger bars from below the ceiling
� Six cutouts for easily crimping hanger bars in position
� Halo name embossed on plaster frame
C . . .Junction Box
� Listed for through branch circuit wiring
� Positioned to accommodate straight conduit runs
� Seven 1/2" trade size conduit knockouts with true pry-out slots
� Slide-N-Side� wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wider range of nonmetallic sheathed cable � the standard cable types used in lighting for both U.S. and Canada.
� Allows wiring connections to be made outside the junction box
� Simply insert the cable directly into the trap after connections are made
� Accommodates the following standard non-metallic sheathed cable types:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
D. . .GOT NAIL!� Pass-NThru � Bar Hangers
Bar Hanger Features include:
� Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams
� Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.
� Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails
� Housing can be positioned at any point within 24" joist span
� Score lines allow "tooless" shortening for 12" joists
� Bar hangers may be repositioned 90�
� Bar hangers do not need to be removed from frame for shortening
� Integral T-bar clips snaps onto T-bars - no additional clips required
E . . .Transformer
� 120V Integral magnetic transformer steps line voltage down to lamp operating voltage. For lamps up to 50W.
F . . .Thermal Protector
� Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation.
Labels
� UL/cUL Listed for Damp Location
� UL/cUL listed for Feed Through
� IP Rated (Improper Lamp)
The H1499T is a small aperture low voltage housing for providing accent and task lighting. The H1499T is designed for use in noninsulated ceiling or for insulated ceilings but insulation MUST be kept 3" from all sides of the housing.
A. . .Housing
� Die-stamped 20 gauge CRS with white powder coat finish.
B . . .Plaster Frame
� Galvanized steel construction. The housing can be removed from plaster frame to provide access to the junction box.
Plaster frame features include:
� Regressed locking screw for securing hanger bars from below the ceiling
� Six cutouts for easily crimping hanger bars in position
� Halo name embossed on plaster frame
C . . .Junction Box
� Listed for through branch circuit wiring
� Positioned to accommodate straight conduit runs
� Seven 1/2" trade size conduit knockouts with true pry-out slots
� Slide-N-Side� wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wider range of nonmetallic sheathed cable � the standard cable types used in lighting for both U.S. and Canada.
� Allows wiring connections to be made outside the junction box
� Simply insert the cable directly into the trap after connections are made
� Accommodates the following standard non-metallic sheathed cable types:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
D. . .GOT NAIL!� Pass-NThru � Bar Hangers
Bar Hanger Features include:
� Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams
� Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.
� Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails
� Housing can be positioned at any point within 24" joist span
� Score lines allow "tooless" shortening for 12" joists
� Bar hangers may be repositioned 90�
� Bar hangers do not need to be removed from frame for shortening
� Integral T-bar clips snaps onto T-bars - no additional clips required
E . . .Transformer
� 120V Integral magnetic transformer steps line voltage down to lamp operating voltage. For lamps up to 50W.
F . . .Thermal Protector
� Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation.
Labels
� UL/cUL Listed for Damp Location
� UL/cUL listed for Feed Through
� IP Rated (Improper Lamp)
Accessories
 |  |  |
 |  |  |
 |  |  |
 |  |  |
