Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
6" LED ICAT REMODEL HOUSING
 "HALO H750RICAT 6\" H7 REMODEL HOUSING ICAT (LED)")
HALOH750RICAT
DESCRIPTION: H750RICAT Housing
The H750RICAT is a dedicated LED Remodel housing to be used with Halo LED modules.The H750RICAT is designed for remodel applications in insulated ceilings and can be in direct contact with ceiling insulation. This AIR-TITE� housing design prevents airflow between attic and living areas and saves on both heating and air conditioning costs. Halo LED luminaires are designed for longevity and energy efficiency. The H750RICAT LED connector system provides High Efficacy code compliance when used with Cooper Lighting�s LED modules. The H750RICAT housing meets Energy-Star� SSL Standards when used with Energy-Star� qualified Halo LED modules. Halo LED luminaire systems (Housings, LED Modules and Trims) carry a three year limited warranty.
S P E C I F I CAT ION F EATUR E S
Housing
Single wall aluminum housing. Openings are gasketed for AIRTITE � installation. Can be used in 2"x 8" joist construction ( with 1/2" or 5/8" ceiling material). Junction Box
� Seven 1/2� trade size conduit knockouts with true pry-out slots.
� Slide-N-Side� wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts.
� Accepts a wider range of nonmetallic sheathed cable - the standard cable types used in lighting for both US and Canada.
>>Allows wiring connections to be made outside the box.
>>Simply insert the cable directly into the trap after connections are made.
>>Accommodates the following
standard non-metallic sheathed cable types. (US) #14/2, #14/3, #12/2, #12/3 (Canada) #14/2, #14/3, #12/2
Remodel Springs
Four remodel clips secure housing and accommodate 1/2� and 5/8� ceiling material.
LED Module Connection
Halo LED module simply installs with a plug-in line voltage wiring connector(UL and CSA Listed
Luminaire Disconnect). This nonscrew- base connection preserves the high efficacy rating and prevents use of low efficacy incandescent sources.
Labels
� UL/cUL Listed
� Listed for Feed Through
� Listed for direct contact with insulation and combustible material
� Listed for Damp Location
� Listed for Wet Location with
select trims
� Rated for 15W maximum Meets following requirements:
� State of California Title 24-2008 High Efficacy Compliant.
� International Energy Conservation Code (IECC) - 2009 High Efficacy Compliant
� Washington State Energy Code - AIR-TITE�
� New York State Energy Conservation Code - AIR-TITE�
� AIR-TITE�Certified under ASTME283
DESCRIPTION: H750RICAT Housing
The H750RICAT is a dedicated LED Remodel housing to be used with Halo LED modules.The H750RICAT is designed for remodel applications in insulated ceilings and can be in direct contact with ceiling insulation. This AIR-TITE� housing design prevents airflow between attic and living areas and saves on both heating and air conditioning costs. Halo LED luminaires are designed for longevity and energy efficiency. The H750RICAT LED connector system provides High Efficacy code compliance when used with Cooper Lighting�s LED modules. The H750RICAT housing meets Energy-Star� SSL Standards when used with Energy-Star� qualified Halo LED modules. Halo LED luminaire systems (Housings, LED Modules and Trims) carry a three year limited warranty.
S P E C I F I CAT ION F EATUR E S
Housing
Single wall aluminum housing. Openings are gasketed for AIRTITE � installation. Can be used in 2"x 8" joist construction ( with 1/2" or 5/8" ceiling material). Junction Box
� Seven 1/2� trade size conduit knockouts with true pry-out slots.
� Slide-N-Side� wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts.
� Accepts a wider range of nonmetallic sheathed cable - the standard cable types used in lighting for both US and Canada.
>>Allows wiring connections to be made outside the box.
>>Simply insert the cable directly into the trap after connections are made.
>>Accommodates the following
standard non-metallic sheathed cable types. (US) #14/2, #14/3, #12/2, #12/3 (Canada) #14/2, #14/3, #12/2
Remodel Springs
Four remodel clips secure housing and accommodate 1/2� and 5/8� ceiling material.
LED Module Connection
Halo LED module simply installs with a plug-in line voltage wiring connector(UL and CSA Listed
Luminaire Disconnect). This nonscrew- base connection preserves the high efficacy rating and prevents use of low efficacy incandescent sources.
Labels
� UL/cUL Listed
� Listed for Feed Through
� Listed for direct contact with insulation and combustible material
� Listed for Damp Location
� Listed for Wet Location with
select trims
� Rated for 15W maximum Meets following requirements:
� State of California Title 24-2008 High Efficacy Compliant.
� International Energy Conservation Code (IECC) - 2009 High Efficacy Compliant
� Washington State Energy Code - AIR-TITE�
� New York State Energy Conservation Code - AIR-TITE�
� AIR-TITE�Certified under ASTME283
