4" Insulated Ceiling AIR-TITE Line Voltage Recessed Housing

HALO H99ICAT

The H99ICAT is a small aperture housing for accent and task lighting. It is designed for use in insulated ceilings where it will be in direct contact with insulation. It is an AIR-TITE housing designed to prevent air flow between living spaces and unconditioned areas.

A. . . Outer Housing

� Aluminum construction helps dissipate heat.

B . . . Inner Housing

� Double wall aluminum construction helps dissipate heat. The inner housing can be adjusted in the plaster frame to compensate for different ceiling materials.

C . . .Plaster Frame

� Galvanized steel construction. The housing can be removed from plaster frame to provide access to the junction box.

Plaster frame features include:

� Regressed locking screw for securing hanger bars from below the ceiling

� Six cutouts for easily crimping hanger bars in position

� Halo name embossed on plaster frame

C . . .Junction Box

� Listed for through branch circuit wiring

� Positioned to accommodate straight conduit runs

� Seven 1/2" trade size conduit knockouts with true pry-out slots

� Slide-N-Side� wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wider range of non-metallic sheathed cable � the standard cable types used in lighting for both U.S. and Canada.

� Allows wiring connections to be made outside the junction box

� Simply insert the cable directly into the trap after connections are made

� accommodates the following standard non-metallic sheathed cable types:

(US) #14/2, #14/3, #12/2, #12/3

(Canada) #14/2, #14/3, #12/2

E . . ."GOT NAIL! Pass-NThru � Bar Hangers

Bar Hanger Features include:

� Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams

� Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.

� Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails

� Housing can be positioned at any point within 24" joist span

� Score lines allow "tooless" shortening for 12" joists

� Bar hangers may be repositioned 90�

� Bar hangers do not need to be removed from frame for shortening

� Integral T-bar clips snaps onto T-bars - no additional clips required

F . . .Socket

� Fixed position porcelain socket with nickel plated brass screw shell provides consistent lamp positioning.

G. . .Thermal Protector

� Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping.

Labels

� UL/cUL Listed for Damp Location

� UL/cUL listed for Feed Through

� UL/cUL listed for Direct Contact with Insulation and combustible material

Meets following requirements:

� California Title 24 Low Efficacy Luminaire IC and AT requirement

� State of Washington Energy Code

� International Energy Conservation Code

� New York State Energy Conservation Code (NY-ECCC)

� Certified under ASTM