Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
6" IC, Air-Tite, Remodel Housing
 "Halo E7RICAT 6\" IC, Air-Tite, Remodel Housing")
The E7RICAT is a compact and efficient recessed housing optimized and
listed for EISA compliant tungsten-halogen, CFL and LED lamps as well
as incandescent. Housing is suitable for residential or light
commercial applications. For installation in insulated ceilings* and
non-insulated ceilings with airtight code compliant construction. Use
with a variety of trims and finishes to create different lighting
effects or to match any decor. May be retrofit with compatible HALO LED
lighting systems.
Housing
� Single wall die-formed aluminum housing
� Housing features a precision rolled interlocking collar which maintains aperture geometry for greater assurance of installation results
� Integral Air-Tite gasket for code required gasket between fixture and finished ceiling - seals aperture without need for additional caulk
� Shipped with socket overspray protector installed
� For installation from below the finished ceiling. Integral flange secures fixture against ceiling
Remodel Retention System - Speed Clamps
� Exclusive two integral speed clamps securely lock housing to ceiling, accommodating 3/8� to 2� ceiling materials
� Use screwdriver or power driver to set clamps Socket Plate
� Rigid socket plate adjusts and locks without tools for various lamp sizes.
� Socket plate and bracket may be removed when using socket supporting trims
Includes:
Remodel Speed Clamps
� (2) Exclusive integral speed clamps
� Speed clamp tabs securely lock to ceiling
� Speed clamps can be loosened for easy repositioning
� Speed clamps feature internal drive screws � a power screwdriver speeds installation
� Two-tier tabs adjust for 3/8� to 2� of various ceiling materials
Attached-Arm Design
� Attached arm gets into tight spaces
� Ease of installing through the ceiling aperture
� Smaller footprint for packing and distributor shelf space
Hinged junction box w/ Slide-N-Side�
� (4) �� conduit pry-outs
� (2) Slide-N-Side� Non-Metallic (NM) wire traps, allow wiring outside the box
� For 14-2, 14-3, 2-2, 12-3 U.S. and 14-2, 14-3, 12-2 Canadian
� Hinged door for easy access
Quick Connect� Wiring Tray
� (3) Color coded push wire nuts in captive tray for one-handed connection
� Aids in speed & reliability
� Clear caps for wire connection visibility
cULus Listed
� Compact 10 in3 box volume
� Listed for maximum (6) No. 12 AWG or (8) No. 14 AWG 90? C splice conductors in box
Remodel Flange
� Die formed flange maintains precise whole circumference
� Integral flange secures fixture against the ceiling
Air-Tite� code compliant
� Certified under ASTM E283
� Exclusive gasket seals aperture, frame & ceiling
� No additional caulk required
Socket
� Porcelain socket with nickel plated brass screw shell
� Snap-in springs secure socket to socket plate, and may be detached when using socket supporting trims
Thermal Protector
� Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping
Trims
� Halo Fit-All concept offers multiple trim options in a variety of design styles, and functional beam distributions to control beam angle and lumen delivery in accommodating various lamp types including Halogen, CFL and LEDD
Compliance
� cULus Listed 1598 Luminaire
� cULus Listed Damp Location
� cULus Listed for Wet Location, covered ceiling, with select trims
� cULus Listed for direct contact with insulation and combustible material*
� Air-Tite code compliant. Certified under ASTM E283; not exceeding 2.0 cfm (0.944 L/s) air leakage rate tested at a 1.57 psf (75 Pa) pressure differential
� RoHS compliant
*Not to be used in direct contact with spray foam insulation (Consult NEMA LSD57-2013)
Housing
� Single wall die-formed aluminum housing
� Housing features a precision rolled interlocking collar which maintains aperture geometry for greater assurance of installation results
� Integral Air-Tite gasket for code required gasket between fixture and finished ceiling - seals aperture without need for additional caulk
� Shipped with socket overspray protector installed
� For installation from below the finished ceiling. Integral flange secures fixture against ceiling
Remodel Retention System - Speed Clamps
� Exclusive two integral speed clamps securely lock housing to ceiling, accommodating 3/8� to 2� ceiling materials
� Use screwdriver or power driver to set clamps Socket Plate
� Rigid socket plate adjusts and locks without tools for various lamp sizes.
� Socket plate and bracket may be removed when using socket supporting trims
Includes:
Remodel Speed Clamps
� (2) Exclusive integral speed clamps
� Speed clamp tabs securely lock to ceiling
� Speed clamps can be loosened for easy repositioning
� Speed clamps feature internal drive screws � a power screwdriver speeds installation
� Two-tier tabs adjust for 3/8� to 2� of various ceiling materials
Attached-Arm Design
� Attached arm gets into tight spaces
� Ease of installing through the ceiling aperture
� Smaller footprint for packing and distributor shelf space
Hinged junction box w/ Slide-N-Side�
� (4) �� conduit pry-outs
� (2) Slide-N-Side� Non-Metallic (NM) wire traps, allow wiring outside the box
� For 14-2, 14-3, 2-2, 12-3 U.S. and 14-2, 14-3, 12-2 Canadian
� Hinged door for easy access
Quick Connect� Wiring Tray
� (3) Color coded push wire nuts in captive tray for one-handed connection
� Aids in speed & reliability
� Clear caps for wire connection visibility
cULus Listed
� Compact 10 in3 box volume
� Listed for maximum (6) No. 12 AWG or (8) No. 14 AWG 90? C splice conductors in box
Remodel Flange
� Die formed flange maintains precise whole circumference
� Integral flange secures fixture against the ceiling
Air-Tite� code compliant
� Certified under ASTM E283
� Exclusive gasket seals aperture, frame & ceiling
� No additional caulk required
Socket
� Porcelain socket with nickel plated brass screw shell
� Snap-in springs secure socket to socket plate, and may be detached when using socket supporting trims
Thermal Protector
� Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping
Trims
� Halo Fit-All concept offers multiple trim options in a variety of design styles, and functional beam distributions to control beam angle and lumen delivery in accommodating various lamp types including Halogen, CFL and LEDD
Compliance
� cULus Listed 1598 Luminaire
� cULus Listed Damp Location
� cULus Listed for Wet Location, covered ceiling, with select trims
� cULus Listed for direct contact with insulation and combustible material*
� Air-Tite code compliant. Certified under ASTM E283; not exceeding 2.0 cfm (0.944 L/s) air leakage rate tested at a 1.57 psf (75 Pa) pressure differential
� RoHS compliant
*Not to be used in direct contact with spray foam insulation (Consult NEMA LSD57-2013)
