HALO ML5609827 (27/30/35/40) 5"&6" LED MODULE 900 Lumens 80 CRI
Description
The Halo ML56 LED Downlighting System is a series of modular LED Light Modules for
use with designated 5� or 6� ML56 LED trims in new construction, remodel and retrofit
installation. Compatible with Halo 5� H550 and 6� H750, H2750 Series LED housings. And
in retrofit of existing housings the ML56 Series fits 5" or 6" Halo, All-Pro, and others. ML56
system offers shallow trims for installation in Halo, All-Pro and others shallow housings.
ML56 Light Modules are offered in 600 Series, 900 Series, and 1200 Series, 80CRI or 90CRI,
and four color temperatures 2700K, 3000K, 3500K, 4000K. ML56 Light Modules are universal
voltage 120V � 277V and dimmable at 120V. The ML56 lens provides uniform diffuse
illumination standard.
Specification Features
Mechanical
Light Module
� Module includes LED package, LED driver,
heat sink, and lens
� Durable die-cast aluminum construction.
� Heat sink designed to conduct heat
away from the LED keeping the junction
temperatures below specified maximums,
including insulated ceiling environments
Lens
� Impact-resistant polycarbonate
� Convex form for lamp-like appearance
� High lumen transmission
� Diffusing for even illumination
Mounting
� Light Modules attach to reflector and
baffle trims via locking tabs, and attach
to eyeballs via keyed twist-to-lock mating
bosses
� The complete light module and trim
assembly installs into housings with
precision formed torsion springs located
on the trim
� Friction Blade mounting is an alternate
option using the accessory 6� Friction
Blade Kit model ML56CLIP (order separately).
Friction blades provide alternative
to torsion springs for retrofit in 6� housings
without torsion mounting tabs. The
stainless steel friction blades allow the
ML56 to be installed in a wider range of
housings, and allow rotation in the housing
aperture (360 degrees).
Housing Compatibility
A complete ML56 system includes a LED
Light Module, LED trim, and a compatible
housing (new construction, remodel, or
existing retrofit). Housing compatibility
in the ML56 System is determined by the
ML56 trim dimensions. ML56 trims are
available in 5� and 6� aperture (5� = 59xx
series and 6� = 69xx series trims). Refer to
Housing � Trim Section in this document.
LED
� 900 Series = 900 design lumens typical.
� Delivered lumens vary depending upon 5"
or 6", color temperature, and trim finish.
� Color Temperature options: 2700K,
3000K, 3500K, 4000K
� CRI: 80
� L70 at 50,000 hours, projected in accordance
with IES TM-21
� LED is a chip on board design consisting
of a multiple LED package to create one
virtual light source for a productive �cone
of light�
Color Specification & Quality Standards
� A tight chromaticity specification ensures
LED color uniformity, sustainable Color
Rendering Index (CRI) and Correlated
Color Temperature (CCT) over the useful
life of the LED
� LED color uniformity of 3 SDCM exceeds
ENERGY STAR� color standards per
ANSI C78.377- 2008.
� Every Halo LED Light Module is quality
tested and performance measured, and
then serialized in a permanent record to
register lumens, wattage, CRI and CCT.
� Halo LED serialized testing and measurement
process ensures color and lumen
consistency on a per-unit basis, and
validates long-term product consistency
over time
� Halo ML56 LED Light Modules include
lumen, CRI, and CCT designations in the
model number
� Example: ML5609830
56 = 5� / 6� aperture series
09 = 900 lumen series
8 = >80 CRI
30 = 3000K nominal CCT
Electrical Power Connections
� LED connector is a non-screw base
luminaire disconnect offering easy installation
with the matching Halo 5� H550
series and 6� H750 and H2750 series
housings (housing selected depends upon
LED trim 5� or 6�).
� LED Connector is a non-screw base,
and where required to qualify as a highefficacy
luminaire.
� The included E26 medium screw-base
Edison adapter provides easy retrofit
of incandescent housings (see Housing
Section).
Ground Connection
Separate grounding cable included on the
module for attachment to the housing during
installation.
LED Driver
� Driver is universal voltage 120V-277V,
and may be controlled from a switch in
this range of main inputs (switchable at
120V, 220V, 230V, 240V, and 277V)
� Driver is dimmable at 120V operation
when connected to a compatible dimmer.
� Driver is a high efficiency, electronic
power supply providing DC power to
the LED.
� Driver meets FCC EMI/RFI Consumer
Level limits on 120V main inputs, and is
compliant for use in residential and commercial
installations.
� Driver features high power factor, low
THD, and has integral thermal protection
in the event of over temperature or
internal failure.
� Driver is replaceable, if replacement
should be required.
Dimming
Designed for dimming capability to nominal
5% in normal operation with standard 120V
Leading Edge (LE) and Trailing Edge (TE)
phase control dimmers. (Consult dimmer
manufacturer for dimmer compatibility
and details. Note, some dimmers require a
neutral in the wallbox.)
Warranty
Cooper Lighting provides a (5) five year
limited warranty on the Halo ML56 LED
Light Module.
LED Module in New or Retrofit Existing
Construction � Housings other than Halo
or All-Pro
� If used in recessed housings other than
Halo or All-Pro the Cooper Lighting 5-year
limited warranty applies to the LED Light
Module and Trim only.
� As with any electrical installation, a qualified
electrician must ensure compatibility
of use with a particular housing; this
includes all applicable national and local
electrical and building codes. Installer
is responsible to properly and securely
retain the LED Module and LED Trim in
the housing at time of installation.
Compliance
� cULus listed 1598 Luminaire (Halo and All-Pro housings
� UL Classified when used in retrofit (refer to housing
section)
� cULus listed for damp locations
� cULus Wet location listed with baffle and reflector trims
only
� Airtight certified per ASTM E283 (not exceeding 2.0 CFM
under 57 Pascals pressure difference)
� IP66 ingress protection rated with baffle and reflector
trims only
� RoHS compliant
� May be used in IC (insulated ceiling) housings in direct
contact with insulation* and combustible material
� Can be used as a California Title 24 compliant Non-
Residential LED Luminaire
� Can be used for International Energy Conservation Code
(IECC) high efficiency luminaire compliance.
� Can be used for Washington State Energy Code
compliance
� ENERGY STAR� certified luminaire - consult ENERGY
STAR� Certified product list
� EMI/RFI per FCC 47CFR Part 15 Class B Consumer limits
(commercial and residential compliant)
� Photometric testing in accordance with IES LM-79
� Lumen maintenance projections in accordance with IES
LM-80 and TM-21
� CE Mark - �Conformit� Europ�ene� conformity with the
Council of European Communities Directives, meeting
internationally recognized compliance when used with
Halo H550, H750, and H2750 Series LED housings only
* Not for use with housings in direct contact with spray foam insulation.
Refer to ENERGY STAR� Certified Products List.
Can be used to comply with California Title 24 Non-Residential Lighting Controls requirements as a LED Luminaire