Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
80 Watt Electronic Transformer
 "Hatch RS1280 80 Watt Electronic Transformer (120Volt 80Watts)")
Hatch RS1280 80 Watt Electronic Transformer
Electronic Low Voltage Transformer Product 120V 80Watt
Features:
High Reliability
Moisture Resistant
Emits No Audible Noise
Low Harmonic Distortion
High Power Factor
Lightweight, Compact Design
Small Case Size
Works with most commercially available dimmers. Hardwire electronic dimmers are recommended for optimum performance.
Environmental Specifications
Maximum Case Temperature 90�C*
Minimum Starting Temperature -30�C
Sound Rating A+
Operating Humidity 95% relative humidity,non-condensating
Environmental Epoxy Sealed for Protection moisture resistance and shock/vibration resistance
Safety Listing Class P Type 1 outdoor
Electrical/Mechanical Specifications
Soft Start Circuitry
All models of Hatch low-voltage transformers utilize a soft start circuitry to maximize lamp life. The soft start circuit ramps up the lamp filament voltage slowly when the lamp is cold.
NOTE: Instant Start on Hot Lamp Re-Strike
Electronic Short-Circuit Protection
All Hatch low-voltage transformers employ our (ESP) Electronic Short Circuit and over load Protection. The ESP sensing circuit will instantly shut down the output before any of the components are stressed if a short circuit or over load is detected.
The transformer will automatically reset as soon as the fault is corrected.
NOTE: High temperature 3M double sided tape available for use with side lead models only for mounting transformer to enclosure
Input Volt: 120V
Output Volt: 11.5
Input Amps: 0.67
Output Amps : 7.0
Max Watts: 80
Min Watts*: 10
Enclosure Material:Metal
Weight:2.4 oz.
Power Factor: 0.95
Operating Frequency:25 KHz
Total Harmonic Distortion:� 20%
Safety Standard:(Class 2-up to 60 Watt only)
Input Leads:.6�, 18AWG stranded,105 degree C stripped 3/8� tinned
Output Leads :.6�, 18AWG stranded,105 degree C stripped 3/8� tinned
"*Note: Must use a minimum of 20 watts when using dimmers. It is also important to confirm dimming controls compatibility with the manufacturer and your Hatch representative."
Electronic Low Voltage Transformer Product 120V 80Watt
Features:
High Reliability
Moisture Resistant
Emits No Audible Noise
Low Harmonic Distortion
High Power Factor
Lightweight, Compact Design
Small Case Size
Works with most commercially available dimmers. Hardwire electronic dimmers are recommended for optimum performance.
Environmental Specifications
Maximum Case Temperature 90�C*
Minimum Starting Temperature -30�C
Sound Rating A+
Operating Humidity 95% relative humidity,non-condensating
Environmental Epoxy Sealed for Protection moisture resistance and shock/vibration resistance
Safety Listing Class P Type 1 outdoor
Electrical/Mechanical Specifications
Soft Start Circuitry
All models of Hatch low-voltage transformers utilize a soft start circuitry to maximize lamp life. The soft start circuit ramps up the lamp filament voltage slowly when the lamp is cold.
NOTE: Instant Start on Hot Lamp Re-Strike
Electronic Short-Circuit Protection
All Hatch low-voltage transformers employ our (ESP) Electronic Short Circuit and over load Protection. The ESP sensing circuit will instantly shut down the output before any of the components are stressed if a short circuit or over load is detected.
The transformer will automatically reset as soon as the fault is corrected.
NOTE: High temperature 3M double sided tape available for use with side lead models only for mounting transformer to enclosure
Input Volt: 120V
Output Volt: 11.5
Input Amps: 0.67
Output Amps : 7.0
Max Watts: 80
Min Watts*: 10
Enclosure Material:Metal
Weight:2.4 oz.
Power Factor: 0.95
Operating Frequency:25 KHz
Total Harmonic Distortion:� 20%
Safety Standard:(Class 2-up to 60 Watt only)
Input Leads:.6�, 18AWG stranded,105 degree C stripped 3/8� tinned
Output Leads :.6�, 18AWG stranded,105 degree C stripped 3/8� tinned
"*Note: Must use a minimum of 20 watts when using dimmers. It is also important to confirm dimming controls compatibility with the manufacturer and your Hatch representative."
