Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
6" Retrofit LED WarmDim Eyeball 3000K
 "Juno J6RLEWDG3-3K-6-WH 6\" Retrofit LED WarmDim Eyeball 3000K")
Juno J6RLEWDG3-3K-6-WH 6" Retrofit LED WarmDim Eyeball 3000K
Emulates incandescent dimming. Can be installed in dedicated 6" Juno housings with quick connects for full T24 compliance, or can be installed in 6" housings with medium-base socket using supplied adapter. Compatible with most 6" recessed housings measuring at least 5 1/4" high inside diameter between 6" and 6 3/4". Exceptional adjustability - 358 degree rotation, up to 30 degree vertical aiming.
Color Temperature: Available in 3000K, dims to 2000K.
PRODUCT DESCRIPTION
All-in-one 6� LED Retrofit eyeball trim with WarmDim technology installs into existing 6� incandescent housings with medium base sockets or Juno IC23-LEDT24 and IC23R-LEDT24 quick connect recessed housings � LED color temperature warms while dimming to emulate the dimming performance of traditional incandescent light sources� May be used in housings completely covered with insulation � Adjustable eyeball design allows for 30˚ vertical adjustment � Field installable optic accessories available to provide different beam spread options � Dimmable with most standard incandescent or electronic low voltage dimmers � Designed to provide 50,000 hours of life � 5 year limited warranty on LED components.
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT
� No harmful ultraviolet or infrared wavelengths � No lead or mercury � Comparable light output to 65W BR30 incandescent while consuming less than 15W
PRODUCT SPECIFICATIONS
LED Retrofit Eyeball Trim Aluminum eyeball trim with white finish � All-in-one design where LED light engine mounts directly to trim � Up to 30˚ vertical adjustment � Provided with torsion springs as standard � Accessory kit available for use in housings that do not have torsion spring retaining brackets.
LED Light Engine Proprietary micro processor controlled light engine emulates dimming performance of incandescent light source � Integrated to one piece high purity aluminum, thermally conductive eyeball housing providing uninterrupted heat transfer to ensure long life of the LEDs � Replaceable light engine mounts directly to eyeball housing � 3000K color temperature at full lumen output � 83 CRI typical.
LED Driver Dedicated 120 volt driver � Power factor > 0.9 � Dimmable with the use of most incandescent, magnetic low voltage and electronic low voltage wall box dimmers � For a list of compatible dimmers, see JUNOLEDG3-6-WARMDIM.
Optical System Computer-optimized reflector design with high reflectance white finish coupled with a high transmission diffusing lens conceals the LEDs � Efficient system that can produce over 600 lumens while using less than 15W � Wide flood distribution shipped as standard with optional optic accessories available and sold separately.
Electrical Connections Trim features quick connect plug installed as standard for installation into IC23-LEDT24 and IC23R-LEDT24 housings with mating connector � Trim ships with a medium base socket adapter whip for installation into 6� incandescent housings with medium base sockets.
Life Rated for 50,000 hours at 70% lumen maintenance.
Labels ENERGY STAR� Qualified to luminaires V1.1 requirements � Certified to the high efficiency requirements of California T24-2008 � Suitable for damp locations � Union made � UL and cUL classified for use with 6� incandescent medium base housings and Juno IC23-LEDT24 or IC23R-LEDT24.
Testing All reports are based on published industry procedures; field performance may differ from laboratory performance. Product specifications subject to change without notice.
COMPATIBLE HOUSINGS
The J6RLEWDG3 retrofit module is compatible with most 6� recessed housings measuring at least 5-1/4� high with an inside diameter between 6� and 6-3/4�. Removal of the housing socket plate or socket mounting bracket may be required in order for the trim to fit properly. If housing does not have torsion spring brackets, the V6RL-TRB accessory is required. Compatible housings include, but not limited to: Juno housings: IC2 and TC2 Series, IC22 Series, IC23 Series, IC21 Series
VuLite housings: V6IC and V6TC Series
Halo housings: H7 Series
Thomas housings: PS1 and PS3 Series
Capri housings: QL1 Series
Lithonia housings: L7X and LC6 Series
Emulates incandescent dimming. Can be installed in dedicated 6" Juno housings with quick connects for full T24 compliance, or can be installed in 6" housings with medium-base socket using supplied adapter. Compatible with most 6" recessed housings measuring at least 5 1/4" high inside diameter between 6" and 6 3/4". Exceptional adjustability - 358 degree rotation, up to 30 degree vertical aiming.
Color Temperature: Available in 3000K, dims to 2000K.
PRODUCT DESCRIPTION
All-in-one 6� LED Retrofit eyeball trim with WarmDim technology installs into existing 6� incandescent housings with medium base sockets or Juno IC23-LEDT24 and IC23R-LEDT24 quick connect recessed housings � LED color temperature warms while dimming to emulate the dimming performance of traditional incandescent light sources� May be used in housings completely covered with insulation � Adjustable eyeball design allows for 30˚ vertical adjustment � Field installable optic accessories available to provide different beam spread options � Dimmable with most standard incandescent or electronic low voltage dimmers � Designed to provide 50,000 hours of life � 5 year limited warranty on LED components.
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT
� No harmful ultraviolet or infrared wavelengths � No lead or mercury � Comparable light output to 65W BR30 incandescent while consuming less than 15W
PRODUCT SPECIFICATIONS
LED Retrofit Eyeball Trim Aluminum eyeball trim with white finish � All-in-one design where LED light engine mounts directly to trim � Up to 30˚ vertical adjustment � Provided with torsion springs as standard � Accessory kit available for use in housings that do not have torsion spring retaining brackets.
LED Light Engine Proprietary micro processor controlled light engine emulates dimming performance of incandescent light source � Integrated to one piece high purity aluminum, thermally conductive eyeball housing providing uninterrupted heat transfer to ensure long life of the LEDs � Replaceable light engine mounts directly to eyeball housing � 3000K color temperature at full lumen output � 83 CRI typical.
LED Driver Dedicated 120 volt driver � Power factor > 0.9 � Dimmable with the use of most incandescent, magnetic low voltage and electronic low voltage wall box dimmers � For a list of compatible dimmers, see JUNOLEDG3-6-WARMDIM.
Optical System Computer-optimized reflector design with high reflectance white finish coupled with a high transmission diffusing lens conceals the LEDs � Efficient system that can produce over 600 lumens while using less than 15W � Wide flood distribution shipped as standard with optional optic accessories available and sold separately.
Electrical Connections Trim features quick connect plug installed as standard for installation into IC23-LEDT24 and IC23R-LEDT24 housings with mating connector � Trim ships with a medium base socket adapter whip for installation into 6� incandescent housings with medium base sockets.
Life Rated for 50,000 hours at 70% lumen maintenance.
Labels ENERGY STAR� Qualified to luminaires V1.1 requirements � Certified to the high efficiency requirements of California T24-2008 � Suitable for damp locations � Union made � UL and cUL classified for use with 6� incandescent medium base housings and Juno IC23-LEDT24 or IC23R-LEDT24.
Testing All reports are based on published industry procedures; field performance may differ from laboratory performance. Product specifications subject to change without notice.
COMPATIBLE HOUSINGS
The J6RLEWDG3 retrofit module is compatible with most 6� recessed housings measuring at least 5-1/4� high with an inside diameter between 6� and 6-3/4�. Removal of the housing socket plate or socket mounting bracket may be required in order for the trim to fit properly. If housing does not have torsion spring brackets, the V6RL-TRB accessory is required. Compatible housings include, but not limited to: Juno housings: IC2 and TC2 Series, IC22 Series, IC23 Series, IC21 Series
VuLite housings: V6IC and V6TC Series
Halo housings: H7 Series
Thomas housings: PS1 and PS3 Series
Capri housings: QL1 Series
Lithonia housings: L7X and LC6 Series
