Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
6" Incandescent Super Slope Remodel Housing
 "Juno TC928R 6\" Incandescent Super Slope Remodel Housing")
Juno TC928R 6" Incandescent Super Slope Remodel Housing
Features
� 6" Super slope remodel housing (oval)
� Oblique angle housing design holds trims flush with the ceiling
� Adjustable socket plate permits lamp to remain perpendicular to floor through entire pitch range
� Medium base porcelain socket with nickel-plated copper screw shell
� Housing is vertically adjustable to accommodate up to a 1" ceiling thickness
� Housing is secured in place with factory supplied remodel clips
� Telescoping height for use in 2x8 or 2x10 construction
� Pre-wired junction box with (4) 1/2" knockouts with pryout slots, (4) non-metallic sheathed cable connectors, and ground wire
� Shadow-free, knife-edge trim design blends smoothly into the ceiling and allows architectural continuity with Aculux� trims
� Angle-cut baffles ensure grooves remain parallel to the floor to provide proper optics
� UL Listed, C-UL/CSA certified for through-branch wiring, maximum (4) #12 AWG branch circuit conductors (2 in, 2 out)
� Thermally protected against improper use of lamps
� Lamp wattage ratings and apertures based on trim selection
Description
Non-IC rated remodel housing for use in 7/12 to 12/12 pitch slopes (30� to 45�) where the back side of the ceiling is not accessible � Designed to be installed in non-insulated areas, or where insulation is spaced at least 3" from housing � The Juno patented Slope Ceiling Down-Lites direct light straight down, providing proper lighting from a sloped surface
Listings
UL Listed, C-UL/CSA certified for through-branch wiring, damp and wet locations � Wet location listed with the 603 trim � Conforms with City of Chicago IP requirements
Ordering Information
Catalog Number: TC928R
Features
� 6" Super slope remodel housing (oval)
� Oblique angle housing design holds trims flush with the ceiling
� Adjustable socket plate permits lamp to remain perpendicular to floor through entire pitch range
� Medium base porcelain socket with nickel-plated copper screw shell
� Housing is vertically adjustable to accommodate up to a 1" ceiling thickness
� Housing is secured in place with factory supplied remodel clips
� Telescoping height for use in 2x8 or 2x10 construction
� Pre-wired junction box with (4) 1/2" knockouts with pryout slots, (4) non-metallic sheathed cable connectors, and ground wire
� Shadow-free, knife-edge trim design blends smoothly into the ceiling and allows architectural continuity with Aculux� trims
� Angle-cut baffles ensure grooves remain parallel to the floor to provide proper optics
� UL Listed, C-UL/CSA certified for through-branch wiring, maximum (4) #12 AWG branch circuit conductors (2 in, 2 out)
� Thermally protected against improper use of lamps
� Lamp wattage ratings and apertures based on trim selection
Description
Non-IC rated remodel housing for use in 7/12 to 12/12 pitch slopes (30� to 45�) where the back side of the ceiling is not accessible � Designed to be installed in non-insulated areas, or where insulation is spaced at least 3" from housing � The Juno patented Slope Ceiling Down-Lites direct light straight down, providing proper lighting from a sloped surface
Listings
UL Listed, C-UL/CSA certified for through-branch wiring, damp and wet locations � Wet location listed with the 603 trim � Conforms with City of Chicago IP requirements
Ordering Information
Catalog Number: TC928R
