Try Our New Website. Click Here * Under Construction *


Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!


Now We Have Lutron RA2 Select System in Stock Call or E-Mail for a quote

Please E-mail All Your Quote Requests to

[email protected]


6" New Construction LED Housing

Litonia L7XLED T24 R6 6" New Construction LED Housing
Litonia L7XLED T24 R6 6" New Construction LED Housing
Item# LithoniaL7XLEDT24R6
Regular price: $24.95
Sale price: $14.99
QTY.

Litonia L7XLED T24 R6 6" New Construction LED Housing
Litonia L7XLED T24 R6 6" New Construction LED Housing
FEATURES & SPECIFICATIONS
INTENDED USE
Recessed housing rated IC or Non-IC. For new construction only.
Approved for all ceiling and wiring types.
Approved for direct burial in insulation.
CONSTRUCTION
Air-tight standard. Tested to meet current energy codes.
Aluminum foam-gasketed housing with galvanized steel pan.
Galvanized bar hangers span up to 24� o.c. and feature built in nailer and integral T-bar clips. Two locking screws hold fixture in position.
Galvanized steel junction box with four built-in Romex clamps; five �� and two �� nominal knockouts with slots for pryout. Rated for through branch wiring.
Maximum 4 (2 in, 2 out) No 12 AWG conductors. Rated for 90� C.
Ground wire provided.
Removable J-box doors for easy access.
Trim retention (TOR): Two side-mounted torsion springs on the trim and 2 receiving brackets in the can ensure a consistently tight fit with the ceiling.
ELECTRICAL
Quick disconnect provided for power connection to the LED modules.
Paint overspray masked by disposable disconnect plug.
Housing and LED module combination is IC rated and thermally protected.
120 volts only.
INSTALLATION
Air-tight housing suitable for air-tight installations. Refer to energy codes for proper installation.
2 x 8 wood joist or T-bar installation.
Expandable bar hangers allow for off center mounting in wood joist or T-bar ceilings.
Length of 25�� maximum 13�� minimum or cut to fit 9� on center joist construction.
Vertical adjustment of housing allows for flush mounting with ceiling face.
Suitable to ceilings up to 1-1/2" thick.
LISTINGS
UL Listed to US and Canadian safety standards.
Wet location listed, Title 24 compliant.
WARRANTY � 1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.
Specifications
Height: 6-7/8 (17.5)
Length: 15 (38.1)
Width: 13-7/8 (35.2)
Ceiling cutout: 7 (17.8)
All dimensions are inches (centimeters) unless otherwise specified.