Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
3" IC AIR-TITE Shallow Line Voltage Recessed Housing
HALO H36ICAT
IC AIR-TITE� fixture for use with H3 3" series trims. Housing is AIR-TITE with supplied gasket and prevents airflow between heated or air conditioned spaces and unconditioned attic areas. For use with 120V GU10 lamps.
� H36ICAT is IC rated and may be used in insulated ceilings and be covered with insulation material.
Housing
� IC and AIR-TITE�rated double wall aluminum construction.
Plaster Frame
� Housing adjusts in plaster frame to accommodate up to 1-1/2" ceiling thickness. Galvanized steel construction.
Plaster frame features include:
� Regressed locking screw for securing hanger bars.
� Cutouts for easily crimping hanger bars in position.
� Halo name embossed on plaster frame. The housing may be removed from plaster frame to provide access to the junction box.
Junction Box
� UL Listed for through branch circuit wiring (maximum 8 No.12 ga., 90�C conductors).
� Four 1/2" trade size conduit knockouts with true pry-out slots are positioned to accommodate straight conduit runs.
� Three Slide-N-Side� wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wide range of non-metallic sheathed cable.
� Allows wiring connections to be made outside the junction box.
� Simply insert the cable directly into the trap after connections are made.
� Accommodates the following standard non-metallic sheathed cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
Got NAIL!� Bar Hangers
� Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams.
� Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.
� Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails.
� Housing can be positioned at any point within 24" joist span
� Pass-N-Thru� feature allows bar hangers to be shortened without removing from plaster frame.
� Score lines allow "tooless" shortening for 12" joists.
� Bar hangers may be repositioned 90�.
� Integral T-bar clip snaps onto T-bars - no additional clips required.
Socket
� GU10 socket for 120V GU10 lamps.
Labels
� UL/cUL Listed
� Damp Location Listed
� UL listed for Feed Through
� UL listed for Direct Contact with Insulation and combustible material
Meets following requirements:
� State of California Title 24
� Washington State Energy Code
� International Energy Conservation Code (IECC)
� New York State Energy Conservation Construction Code
� Certified Under ASTM-E283 for air tight construction.
IC AIR-TITE� fixture for use with H3 3" series trims. Housing is AIR-TITE with supplied gasket and prevents airflow between heated or air conditioned spaces and unconditioned attic areas. For use with 120V GU10 lamps.
� H36ICAT is IC rated and may be used in insulated ceilings and be covered with insulation material.
Housing
� IC and AIR-TITE�rated double wall aluminum construction.
Plaster Frame
� Housing adjusts in plaster frame to accommodate up to 1-1/2" ceiling thickness. Galvanized steel construction.
Plaster frame features include:
� Regressed locking screw for securing hanger bars.
� Cutouts for easily crimping hanger bars in position.
� Halo name embossed on plaster frame. The housing may be removed from plaster frame to provide access to the junction box.
Junction Box
� UL Listed for through branch circuit wiring (maximum 8 No.12 ga., 90�C conductors).
� Four 1/2" trade size conduit knockouts with true pry-out slots are positioned to accommodate straight conduit runs.
� Three Slide-N-Side� wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wide range of non-metallic sheathed cable.
� Allows wiring connections to be made outside the junction box.
� Simply insert the cable directly into the trap after connections are made.
� Accommodates the following standard non-metallic sheathed cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
Got NAIL!� Bar Hangers
� Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams.
� Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.
� Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails.
� Housing can be positioned at any point within 24" joist span
� Pass-N-Thru� feature allows bar hangers to be shortened without removing from plaster frame.
� Score lines allow "tooless" shortening for 12" joists.
� Bar hangers may be repositioned 90�.
� Integral T-bar clip snaps onto T-bars - no additional clips required.
Socket
� GU10 socket for 120V GU10 lamps.
Labels
� UL/cUL Listed
� Damp Location Listed
� UL listed for Feed Through
� UL listed for Direct Contact with Insulation and combustible material
Meets following requirements:
� State of California Title 24
� Washington State Energy Code
� International Energy Conservation Code (IECC)
� New York State Energy Conservation Construction Code
� Certified Under ASTM-E283 for air tight construction.
