Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
3" Non-IC AIR-TITE Remodel Shallow Line Voltage Recessed Housing
HALO H36RTAT
Non-IC AIR-TITE� remodel fixture for use with H3 3" series trims. Can be installed from below the ceiling. Housing is AIR-TITE with supplied gasket and prevents airflow between heated or air conditioned spaces and unconditioned attic areas. For use with 120V GU10 lamps.
� Non-IC Housing is AIR-TITE� but insulation must be kept 3� away from all sides of housing.
Housing
� Formed of 20 gauge CRS with white powder coat finish.
Supports
� �Easy clip� provided to secure plaster frame in ceiling while installation is being completed. Adjustable cam-locks provide positive lock of housing to plaster frame to complete housing installation.
Junction Box
� UL Listed for through branch circuit wiring (maximum 8 No.12 ga., 90�C conductors).
� Four 1/2" trade size conduit knockouts with true pry-out slots are positioned to accommodate straight conduit or metallic �MC� cable runs in new construction.
� Three Slide-N-Side� wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wide range of non-metallic sheathed cable.
� Allows wiring connections to be made outside the junction box
� Simply insert the cable directly into the trap after connections are made.
� Accommodates the following standard non-metallic sheathed cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
� No-accessible ceiling installation requires nonmetallic �NM� sheathed cable connection.
Socket
� GU10 socket for 120V GU10 lamps.
Labels
� UL/cUL Listed
� Damp Location Listed
� Listed for Feed Through
� Certified Under ASTM-E283 for air tight construction
Non-IC AIR-TITE� remodel fixture for use with H3 3" series trims. Can be installed from below the ceiling. Housing is AIR-TITE with supplied gasket and prevents airflow between heated or air conditioned spaces and unconditioned attic areas. For use with 120V GU10 lamps.
� Non-IC Housing is AIR-TITE� but insulation must be kept 3� away from all sides of housing.
Housing
� Formed of 20 gauge CRS with white powder coat finish.
Supports
� �Easy clip� provided to secure plaster frame in ceiling while installation is being completed. Adjustable cam-locks provide positive lock of housing to plaster frame to complete housing installation.
Junction Box
� UL Listed for through branch circuit wiring (maximum 8 No.12 ga., 90�C conductors).
� Four 1/2" trade size conduit knockouts with true pry-out slots are positioned to accommodate straight conduit or metallic �MC� cable runs in new construction.
� Three Slide-N-Side� wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wide range of non-metallic sheathed cable.
� Allows wiring connections to be made outside the junction box
� Simply insert the cable directly into the trap after connections are made.
� Accommodates the following standard non-metallic sheathed cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
� No-accessible ceiling installation requires nonmetallic �NM� sheathed cable connection.
Socket
� GU10 socket for 120V GU10 lamps.
Labels
� UL/cUL Listed
� Damp Location Listed
� Listed for Feed Through
� Certified Under ASTM-E283 for air tight construction
