Try Our New Website. Click Here * Under Construction *

Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!

Now We Have Lutron RA2 Select System in Stock Call or E-Mail for a quote

Please E-mail All Your Quote Requests to

[email protected]

3" Non-IC AIR-TITE Shallow Low Voltage Recessed Housing

HALO H36LVTAT 3" Non-IC AIR-TITE Shallow Low Voltage Recessed Housing 12V MR16
HALO H36LVTAT 3" Non-IC AIR-TITE Shallow Low Voltage Recessed Housing 12V MR16
Regular price: $139.99
Sale price: $69.99


Non-IC AIR-TITE� fixture for use with H3 3" series trims. Housing is AIR-TITE with supplied gasket and prevents airflow between heated or air conditioned spaces and unconditioned attic areas. For use with 12V MR16 lamps.

� Non-IC Housing is AIR-TITE� but insulation must be kept 3� away from all sides of housing.


Formed of 20 gauge CRS with white powder coat finish.

Plaster Frame

� Housing adjusts in plaster frame to accommodate up to 1-1/2" ceiling thickness. Galvanized steel construction.

Plaster frame features include:

� Regressed locking screw for securing hanger bars.

� Cutouts for easily crimping hanger bars in position.

� Halo name embossed on plaster frame. The housing may be removed from plaster frame to provide access to the junction box.

Junction Box

� UL Listed for through branch circuit wiring (maximum 8 No.12 ga., 90�C conductors).

� Four 1/2" trade size conduit knockouts with true pry-out slots are positioned to accommodate straight conduit runs.

� Three Slide-N-Side� wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wide range of non-metallic sheathed cable.

� Allows wiring connections to be made outside the junction box

� Simply insert the cable directly into the trap after connections are made.

� Accommodates the following standard non-metallic sheathed cable sizes:

(US) #14/2, #14/3, #12/2, #12/3

(Canada) #14/2, #14/3, #12/2

Got NAIL!� Bar Hangers

� Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams.

� Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.

� Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails.

� Housing can be positioned at any point within 24" joist span

� Pass-N-Thru� feature allows bar hangers to be shortened without removing from plaster frame.

� Score lines allow "tooless" shortening for 12" joists.

� Bar hangers may be repositioned 90�.

� Integral T-bar clip snaps onto T-bars - no additional clips required.


� Integral magnetic transformer steps 120V line voltage down to 12V lamp operating voltage.


� GU5.3 socket for 12V MR16 lamps


� UL/cUL Listed

� Damp Location Listed

� Listed for Feed Through

� Certified Under ASTM