4" LED ICAT New Construction HOUSING

HALO H455ICAT120D 4" LED ICAT New Construction HOUSING

HALOH455ICAT

DESCRIPTION: H455ICAT120D Housing

HALO LED H4 Ser ies The Halo H4 LED is a family of 4� aperture recessed downlights with H455 series housings designed for use with Halo EL4 Series LED Light Engines and compatible 4� LED trims. Halo H4 LED housings have integral LED drivers that offer dimming as a standard feature. H455ICAT120D is an insulated ceiling, AIR-TITE� housing offering 120 volt dimming capability with many incandescent or electronic low voltage dimmers. Designed for use with EL4 series LED Light Engines and TL4 LED Series Trims, the H455ICAT120D offers high quality downlighting along with high efficacy � the result being great lighting and significant energy savings.

DESIGN FEATURES

MECHANICAL

(A) Housings

� Box enclosure of formed aluminum construction.

� Openings are gasketed for AIR-TITE installation.

(B) Plaster Frame

� Galvanized steel die-formed construction.

� Plaster frame designed with removable bar hangers for installation in new construction.

� AIR-TITE aperture gasket is pre-installed.

� HALO identity embossed on plaster frame.

MOUNTING

(C) GOT NAIL! Pass -N-Thru�

Bar Hangers

Bar Hanger Features include:

� Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams

� Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.

� Automatic leveling flange aligns the housing and lets you hold the housing in place with one hand while driving nails

� Housing can be positioned at any point within 24� joist span

� Score lines allow �tool-less� shortening for 12� joists

� Bar hangers may be repositioned 90�

� Bar hangers do not need to be removed from frame for shortening

� Integral T-bar clips snaps onto T-bars - no additional clips required.

ELECTRICAL

(D) Junction Box

� Positioned to accommodate straight conduit runs

� Seven 1/2� trade size conduit knockouts with true pry-out slots

� Slide-N-Side� connectors allow non metallic sheathed cable to be installed without tools and without removing knockouts.

� Accepts a wide range of non-metallic sheathed cables - the standard cable types used in lighting in both U.S. and Canada.

Allows wiring connections to be made outside the junction box

Simply insert the cable directly into the trap after connections are made.

Accommodates the following standard nonmetallic sheathed cable types: US: #14/2, #14/3, #12/2, #12/3 Canada: #14/2, #14/3, #12/2

� Three Quick-connect push type wire connectors included.

(E) LED Connection

� LED connector is a non-screw base connector offering easy installation with the EL4 Series LED Light Engine.

� LED connector meets California Title-24 high-efficacy luminaire requirement for a non-screw base socket, and where required to qualify as a high-efficacy luminaire.

(F) LED Driver

� LED dimmable driver mounts internally to the housing.

� Driver is a120 Volt, high efficiency, electronic power supply providing low voltage power to EL Series LED Light Engines.

� Driver meets FCC EMI/RFI Consumer Level limits for use in residential and commercial installations.

� Driver features power factor >.90, THD <20% and has integral thermal protection in the event of over temperature or internal failure.

� Driver is specifically designed for compatibility with H4 LED Light Engines, and operate in conjunction with the LED 50,000 hour / 70% lumen maintenance standard.

� If dimming is not required the fixture can be operated from a standard wall switch.

Dimming

� The HALO H4 LED luminaire is dimmable to 15% with standard 120V electronic low voltage dimmers (recommended), incandescent or magnetic low voltage dimmers; and dims to 5% using dimmers with low end trim adjustment.

� Standard incandescent dimmers require a minimum load of typically >40 watts on the circuit for full range dimming performance (four LED modules).

� For dimming with digital (smart) multi-location dimmers or when dimming fewer than four LED modules, electronic low voltage dimmers are required (ELV dimmers need a neutral connection in the wallbox).

� Refer to dimming application notes, and refer to dimmer manufacturers for compatibility.

Warranty

Cooper Lighting provides a three year limited warranty on Halo LED Luminaires which includes the LED Recessed Housing, LED Light Engine, and LED trims.

Compliance Labels

� UL/cUL Listed 1598 Luminaire

� UL/cUL Listed for Damp Location

� UL/cUL Listed for Wet Location, shower applications with select trims

� UL/cUL listed for Feed Through

� UL/cUL listed for Direct Contact with air-permeable Insulation and combustible material

Qualification

� Can be used for State of California Title 24-2008 high efficacy compliance (with designated LED Light Engines and Trims)

� Can be used for International Energy Conservation Code (IECC) high efficacy compliance (with designated LED Light Engines and Trims)

� Washington State Energy Code � AIR-TITE compliant

� New York State Energy Conservation Construction Code - AIR-TITE compliant

� Certified Under ASTM-E283 standard for air tight construction