Canoga Park Location:
Mon-Fri 6AM-5PM PST, Sat-Sun Closed
Ph: 818-881-1818 Fax: 818-888-7950
Reseda Location:
Mon-Fri 6AM-5PM PST, Sat 7AM-1PM PST, Sun Closed
Ph: 1-800-89READY(7-3239) Ph: 818-881-1800 Fax: 818-881-2827
Home > HALO H455RICAT120D 4" LED ICAT Remodel Housing
Try Our New Website. Click Here * Under Construction *
Note: All orders with
merchandise
totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It
will automatically added to your S&H. Buy more, save more!
Now We Have Lutron RA2 Select System in Stock Call or E-Mail for a quote
The Halo H4 LED is a family of 4� aperture recessed downlights with H455 series housings designed for use with Halo EL4 Series LED Light Engines and compatible 4� LED trims. Halo H4 LED housings have integral LED drivers that offer dimming as a standard feature. H455RICAT120D is an insulated ceiling, AIR-TITE�, remodel housing offering 120 volt dimming capability with many incandescent or electronic low voltage dimmers. Designed for use with EL4 series LED Light Engines, the H455RICAT120D offers high quality downlighting along with high efficacy � the result being great lighting and significant energy savings.
DESIGN FEATURES
MECHANICAL
(A) Housings
Single wall formed aluminum
construction. Openings are
gasketed for AIR-TITE installation.
5 1/2� height allows use in 2�x 6
joist construction. AIR-TITE
aperture gasket is pre-installed.
(B) Remodel Arm
� Spring steel construction
designed for ease of installation
and ceiling support of LED driver.
MOUNTING
(C) Remodel Springs
� Four remodel clips secure
housing and accommodate
1/2� and 5/8� ceiling material.
ELECTRICAL
(D) Junction Box
� Slide-N-Side� connectors allow
non metallic sheathed cable to
be installed without tools and
without removing knockouts.
� Accepts a wide range of
non-metallic sheathed cables
the standard cable types used
in lighting in both U.S. and
Canada.
Allows wiring connections to
be made outside the junction
box.
Simply insert the cable directly
into the trap after connections
are made.
Accommodates the following
standard nonmetallic sheathed
cable types:
US: #14/2, #14/3, #12/2, #12/3
Canada: #14/2, #14/3, #12/2
(E) LED Connection
� LED connector is a non-screw
base connector offering easy
installation with the EL4 Series
LED Light Engine.
� LED connector meets California
Title-24 high-efficacy luminaire
requirement for a non-screw
base socket, and where required
to qualify as a high-efficacy
luminaire.
(F) LED Driver
� LED dimmable driver mounts to
the housing junction box.
� Driver is a 120 Volt, high
efficiency, electronic power
supply providing low voltage
power to EL Series LED Light
Engines.
� Driver meets FCC EMI/RFI
Consumer Level limits for use
in residential and commercial
installations.
� Driver features power factor
>.90, THD <20% and has integral
thermal protection in the event
of over temperature or internal
failure.
� Driver is specifically designed
for compatibility with EL4 LED
Light Engines, and operate in
conjunction with the LED 50,000
hour / 70% lumen maintenance
performance design.
� If dimming is not required the
fixture can be operated from a
standard wall switch
Dimming
� The HALO H4 LED luminaire is
dimmable to 15% with standard
120V electronic low voltage
dimmers (recommended),
incandescent or magnetic low
voltage dimmers; and dims to 5%
using dimmers with low end trim
adjustment.
� Standard incandescent dimmers
require a minimum load of
typically >40 watts on the
circuit for full range dimming
performance (four LED modules).
� For dimming with digital (smart)
multi-location dimmers or when
dimming fewer than four LED
modules, electronic low voltage
dimmers are required (ELV
dimmers need a neutral
connection in the wallbox).
� Refer to dimming application
notes, and refer to dimmer
manufacturers for compatibility.
Warranty
Cooper Lighting provides a three
year limited warranty on Halo LED
Luminaires which includes the
LED Recessed Housing, LED Light
Engine, and LED trims.
Compliance
Labels
� UL/cUL Listed 1598 Luminaire
� UL/cUL Listed for Damp Location
� UL/cUL Listed for Wet Location,
shower applications with select
trims
� UL/cUL listed for Direct Contact
with air-permeable Insulation and
combustible material
Qualification
� Can be used for State of
California Title 24-2008 high
efficacy compliance (with
designated LED Light Engines
and Trims)
� Can be used for International
Energy Conservation Code (IECC)
high efficacy compliance (with
designated LED Light Engines
and Trims)
� Washington State Energy Code �
AIR-TITE compliant
� New York State Energy
Conservation Construction
Code - AIR-TITE compliant
� Certified Under ASTM-E283
standard for air tight construction
We have been in the wholesale electrical supplies business since 1991
and continue to offer the best
wholesale prices to contractors as well as residential customers. Read
more about us
Why shop with us?
- Best Prices on the market
- Wholesale Pricing on all items
- Huge Inventory of Electrical Items
- More Variety Lighting brands
- Fast & Secure Checkout
- Fast Shipping
Need help finding an item?
Call us at (818) 881-1818
We're open Mondays through Fridays 6:00am-5:00pm PST
For Large Orders
Please Call (818) 477-4017
Mondays through Fridays 6:00am-5:00pm PST