Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
4" LED Recessed Remodel Housing Non-Insulated Ceiling
 "HALO H455RTUNVD010 4\" LED Recessed Remodel Housing Non-Insulated Ceiling")
 "HALO H455RTUNVD010 4\" LED Recessed Remodel Housing Non-Insulated Ceiling")
HALO H455RTUNVD010 4" LED Recessed Remodel Housing Non-Insulated Ceiling
HALOH455RTUNVD010
DESCRIPTION: H455RTUNVD010 Housing
The Halo H4 LED is a family of 4” aperture recessed downlights with H455 series housings designed for use with Halo EL4 Series LED Light Engines and compatible 4” LED trims. Halo H4 LED housings have integral LED drivers that offer dimming as a standard feature. H455RTUNVD010 is a Non-IC, AIR-TITE™ remodel housing designed for non-insulated ceiling installations, and offers dimming capability with 0-10VDC control systems. Designed for use with EL4 series LED Light Engines, the H455RTUNVD010 offers high quality downlighting along with high efficacy – the result being great lighting and significant energy savings.
DESIGN FEATURES
MECHANICAL
(A) Housings
Single wall aluminum housing. Openings are gasketed for AIR-TITE installation. 5 1/2” height allows use in 2”x 6 joist construction. AIR-TITE aperture gasket is pre-installed.
(B) Remodel Arm
• Spring steel construction designed for ease of installation and ceiling support of LED driver.
MOUNTING
(C) Remodel Springs
• Four remodel clips secure housing and accommodate 1/2” and 5/8” ceiling material. ELECTRICAL
(D) Junction Box
• Seven 1/2” trade size conduit knockouts with true pry-out slots
• Slide-N-Side™ connectors allow non metallic sheathed cable to be installed without tools and without removing knockouts.
• Accepts a wide range of non-metallic sheathed cables
The standard cable types used in lighting in both U.S. and Canada.
Allows wiring connections to be made outside the junction box.
Simply insert The cable directly into the trap after connections are made.
Accommodates The following standard nonmetallic sheathed
cable types:
US: #14/2, #14/3, #12/2, #12/3 Canada: #14/2, #14/3, #12/2
(E) LED Connection
• LED connector is a non-screw base connector offering easy installation with the EL4 Series LED Light Engine.
• LED connector meets California Title-24 high-efficacy luminaire requirement for a non-screw base socket, and where required to qualify as a high-efficacy luminaire.
(F) LED Driver
• LED dimmable driver mounts to the housing junction box.
• Driver is a120V-277V Universal Voltage, high efficiency, electronic power supply providing low voltage power to EL4 Series LED Light Engines.
• Driver meets FCC EMI/RFI Consumer Level limits for use in residential and commercial installations.
• Driver features power factor >.90, THD <20% and has integral thermal protection in the event of over temperature or internal failure.
• Driver is specifically designed for compatibility with EL4 LED Light Engines, and operate in conjunction with the LED 50,000 hour / 70% lumen maintenance performance design.
• If dimming is not required the fixture can be operated from a standard wall switch
Dimming
• Dimmable with 0-10V DC low voltage dimmers.
• 0-10V DC dimmers operate using two low voltage dimming wires (color coded violet and gray).
The low voltage dimming wires are separate from the 120V AC or 277V AC power.
• Switching on/off is controlled via the line voltage (120V AC or 277V AC) power, and dimming operation is controlled with the 2-wire 0-10V DC low voltage wiring connection between the dimmer and the LED driver.
Warranty
Cooper Lighting provides a three year limited warranty on Halo LED Luminaires which includes the LED Recessed Housing, LED Light Engine, and LED trims.
Compliance Labels
• Pending UL/cUL 1598 Luminaire
• Pending UL/cUL for Damp Location
• Pending UL/cUL for Wet Location, Shower applications with select trims Qualification
• ENERGY STAR® Qualified (with designated LED Light Engines and Trims)
• Can be used for State of California Title 24-2008 high efficacy compliance (with designated LED Light Engines and Trims)
• Can be used for International Energy Conservation Code (IECC) high efficacy compliance (with designated LED Light Engines and Trims)
• Washington State Energy Code – AIR-TITE compliant
• New York State Energy Conservation Construction Code
AIR-TITE compliant
• Certified Under ASTM-E283 standard for air tight construction
HALOH455RTUNVD010
DESCRIPTION: H455RTUNVD010 Housing
The Halo H4 LED is a family of 4” aperture recessed downlights with H455 series housings designed for use with Halo EL4 Series LED Light Engines and compatible 4” LED trims. Halo H4 LED housings have integral LED drivers that offer dimming as a standard feature. H455RTUNVD010 is a Non-IC, AIR-TITE™ remodel housing designed for non-insulated ceiling installations, and offers dimming capability with 0-10VDC control systems. Designed for use with EL4 series LED Light Engines, the H455RTUNVD010 offers high quality downlighting along with high efficacy – the result being great lighting and significant energy savings.
DESIGN FEATURES
MECHANICAL
(A) Housings
Single wall aluminum housing. Openings are gasketed for AIR-TITE installation. 5 1/2” height allows use in 2”x 6 joist construction. AIR-TITE aperture gasket is pre-installed.
(B) Remodel Arm
• Spring steel construction designed for ease of installation and ceiling support of LED driver.
MOUNTING
(C) Remodel Springs
• Four remodel clips secure housing and accommodate 1/2” and 5/8” ceiling material. ELECTRICAL
(D) Junction Box
• Seven 1/2” trade size conduit knockouts with true pry-out slots
• Slide-N-Side™ connectors allow non metallic sheathed cable to be installed without tools and without removing knockouts.
• Accepts a wide range of non-metallic sheathed cables
The standard cable types used in lighting in both U.S. and Canada.
Allows wiring connections to be made outside the junction box.
Simply insert The cable directly into the trap after connections are made.
Accommodates The following standard nonmetallic sheathed
cable types:
US: #14/2, #14/3, #12/2, #12/3 Canada: #14/2, #14/3, #12/2
(E) LED Connection
• LED connector is a non-screw base connector offering easy installation with the EL4 Series LED Light Engine.
• LED connector meets California Title-24 high-efficacy luminaire requirement for a non-screw base socket, and where required to qualify as a high-efficacy luminaire.
(F) LED Driver
• LED dimmable driver mounts to the housing junction box.
• Driver is a120V-277V Universal Voltage, high efficiency, electronic power supply providing low voltage power to EL4 Series LED Light Engines.
• Driver meets FCC EMI/RFI Consumer Level limits for use in residential and commercial installations.
• Driver features power factor >.90, THD <20% and has integral thermal protection in the event of over temperature or internal failure.
• Driver is specifically designed for compatibility with EL4 LED Light Engines, and operate in conjunction with the LED 50,000 hour / 70% lumen maintenance performance design.
• If dimming is not required the fixture can be operated from a standard wall switch
Dimming
• Dimmable with 0-10V DC low voltage dimmers.
• 0-10V DC dimmers operate using two low voltage dimming wires (color coded violet and gray).
The low voltage dimming wires are separate from the 120V AC or 277V AC power.
• Switching on/off is controlled via the line voltage (120V AC or 277V AC) power, and dimming operation is controlled with the 2-wire 0-10V DC low voltage wiring connection between the dimmer and the LED driver.
Warranty
Cooper Lighting provides a three year limited warranty on Halo LED Luminaires which includes the LED Recessed Housing, LED Light Engine, and LED trims.
Compliance Labels
• Pending UL/cUL 1598 Luminaire
• Pending UL/cUL for Damp Location
• Pending UL/cUL for Wet Location, Shower applications with select trims Qualification
• ENERGY STAR® Qualified (with designated LED Light Engines and Trims)
• Can be used for State of California Title 24-2008 high efficacy compliance (with designated LED Light Engines and Trims)
• Can be used for International Energy Conservation Code (IECC) high efficacy compliance (with designated LED Light Engines and Trims)
• Washington State Energy Code – AIR-TITE compliant
• New York State Energy Conservation Construction Code
AIR-TITE compliant
• Certified Under ASTM-E283 standard for air tight construction
