Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
5" Insulated Ceiling AIR-TITE Line Voltage Recessed Housing
 "HALO H5ICAT 5\" Insulated Ceiling AIR-TITE Line Voltage Recessed Housing 120V Incandescent")
HALO H5ICAT
The Halo H5 series utilizes a 5" aperture designed to accommodate smaller sized PAR20 and PAR30 halogen lamps.
� The wide variety of trims available allows a number of different lighting effects to be created with one basic housing.
� The H5ICAT is designed for use in insulated ceiling applications and may be completely covered in insulation. This is an AIR-TITE housing and it meets restricted air flow requirements.
A. . .Housing
Gasketed die-stamped 20 gauge aluminum.
B . . .Plaster Frame
� Galvanized steel construction. The housing can be removed from plaster frame to provide access to the junction box.
Plaster frame features include:
� Regressed locking screw for securing hanger bars
� Cutouts for easily crimping hanger bars in position
� Halo name embossed on plaster frame
C . . .Junction Box
� UL Listed for through branch circuit wiring (maximum 8 No.12 ga., 90�C conductors).
� Four 1/2" trade size conduit knockouts with true pry-out slots are positioned to accommodate straight conduit runs.
� Three Slide-N-Side� wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wide range of non-metallic sheathed cable.
�� Allows wiring connections to be made outside the junction box
�� Simply insert the cable directly into the trap after connections are made.
�� Accommodates the following standard non-metallic sheathed cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
D. . .GOT NAIL! Pass-N-Thru� Bar Hangers
� Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams.
� Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.
� Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails.
� Housing can be positioned at any point within 24" joist span
� Pass-N-Thru� feature allows bar hangers to be shortened without removing from plaster frame.
� Score lines allow "tooless" shortening for 12" joists.
� Bar hangers may be repositioned 90�.
� Integral T-bar clip snaps onto T-bars - no additional clips required.
E . . .Socket
� Porcelain socket with nickel plated brass screw shell, snaps into trim for consistent lamp positioning. Shipping insert protects socket from overspray.
F . . .Thermal Protector
� Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping.
Trims
� Housing accommodates a wide range of Halo 5" trims. Torsion springs on all trims for quick and easy installation.
Labels
� UL/cUL Listed for Damp Location, Feed Through and Direct Contact with Insulation and combustible material
Meets following requirements:
� State of California Title 24
� State of Washington AIRTITE
� IECC-2000 Restricted Air Flow
� Certified under ASTM-E283 for air tight construction
The Halo H5 series utilizes a 5" aperture designed to accommodate smaller sized PAR20 and PAR30 halogen lamps.
� The wide variety of trims available allows a number of different lighting effects to be created with one basic housing.
� The H5ICAT is designed for use in insulated ceiling applications and may be completely covered in insulation. This is an AIR-TITE housing and it meets restricted air flow requirements.
A. . .Housing
Gasketed die-stamped 20 gauge aluminum.
B . . .Plaster Frame
� Galvanized steel construction. The housing can be removed from plaster frame to provide access to the junction box.
Plaster frame features include:
� Regressed locking screw for securing hanger bars
� Cutouts for easily crimping hanger bars in position
� Halo name embossed on plaster frame
C . . .Junction Box
� UL Listed for through branch circuit wiring (maximum 8 No.12 ga., 90�C conductors).
� Four 1/2" trade size conduit knockouts with true pry-out slots are positioned to accommodate straight conduit runs.
� Three Slide-N-Side� wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wide range of non-metallic sheathed cable.
�� Allows wiring connections to be made outside the junction box
�� Simply insert the cable directly into the trap after connections are made.
�� Accommodates the following standard non-metallic sheathed cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
D. . .GOT NAIL! Pass-N-Thru� Bar Hangers
� Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams.
� Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.
� Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails.
� Housing can be positioned at any point within 24" joist span
� Pass-N-Thru� feature allows bar hangers to be shortened without removing from plaster frame.
� Score lines allow "tooless" shortening for 12" joists.
� Bar hangers may be repositioned 90�.
� Integral T-bar clip snaps onto T-bars - no additional clips required.
E . . .Socket
� Porcelain socket with nickel plated brass screw shell, snaps into trim for consistent lamp positioning. Shipping insert protects socket from overspray.
F . . .Thermal Protector
� Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping.
Trims
� Housing accommodates a wide range of Halo 5" trims. Torsion springs on all trims for quick and easy installation.
Labels
� UL/cUL Listed for Damp Location, Feed Through and Direct Contact with Insulation and combustible material
Meets following requirements:
� State of California Title 24
� State of Washington AIRTITE
� IECC-2000 Restricted Air Flow
� Certified under ASTM-E283 for air tight construction
Accessories
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |
