5" Insulated Ceiling AIR-TITE Recessed Housing 26 Watt Compact Fluorescent with Dimming Ballast

HALO H573ICAT1D

The H573ICAT1D is designed for insulated ceilings and can be in direct contact with ceiling insulation. AIRTITE � housing design prevents airflow between attic and living areas and saves on both heating and air conditioning costs.

� The electronic compact fluorescent dimming ballast meets stringent Energy Star requirements including FCC Title 47 CFR part 18 for Consumer equipment. The H573ICAT1D offers compact fluorescent dimming capability with a residential rated electronic fluorescent dimming ballast. The H573ICAT1D is warranted for two years.

A. . .Housing

� Single wall aluminum housing. Openings are gasketed for AIRTITE installation. Can be used in 2�x 8� joist construction. Housing adjusts for ceilings up to 1-3/8� thick. AIR-TITE ceiling gasket included.

B . . .Plaster Frame

� Includes regressed locking screw for hanger bars and cutouts for crimping hanger bars in position.

C . . .Junction Box

� Listed for through branch circuit wiring

� Positioned to accommodate straight conduit runs

� Seven 1/2" trade size conduit knockouts with true pry-out slots

� Slide-N-Side� connectors allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wider range of non-metallic sheathed cable

� � the standard cable types used in lighting for both U.S. and Canada.

� � Allows wiring connections to be made outside the junction box

� � Simply insert the cable directly into the trap after connections are made

� � Accommodates the following standard non-metallic sheathed cable types:

(US) #14/2, #14/3, #12/2, #12/3

(Canada) #14/2, #14/3, #12/2

D. . .Bar Hangers

Bar Hanger Features include:

� Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams

� Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.

� Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails

� Housing can be positioned at any point within 24" joist span

� Score lines allow "tooless" shortening for 12" joists

� Bar hangers may be repositioned 90�

� Bar hangers do not need to be removed from frame for shortening

� Integral T-bar clip snaps onto T-bars

� � no additional clips required

E . . .Socket

� � G24q-3/GX24-3 socket for one 26W DTT*

� � Double Twin Tube (Quad) or 26W TTT

� � Triple Twin Tube 4 pin lamp. * DTT lamp not listed for use with all trims.

F . . .Lamp

� Compact Fluorescent lamp (by others). 26 Watt Lamp Generic Designations DTT-Double Twin Tube* (Quad)(CFQ)

� CFQ26W/G24q 2700K, 3000K, 3500K, 4100K * 26W DTT lamp not listed for use with all trims. See trims on page 2 . TTT-Triple Twin Tube (CFTR)

� CFTR26W/GX24q 2700K, 3000K, 3500K,4100K

� Up to 12,000 hour rated average life

� 82 CRI rated lamps provide excellent color and high visual comfort.

� Color temperature (warm to cool) options offer 2700K warm, 3000K, 3500K medium-warm and 4100K cool incandescent-like light.

G. . .Electronic Ballast

� Models are provided with an Energy Star qualified and Title 24 compliant electronic fluorescent dimming ballast. The dimming ballast is rated for use with 26W Double Twin Tube or Triple Twin Tube (Triple Twin Tube lamp is preferred for best visual comfort).

� The ballast offers 100% to 15% dimming range. Ballast is a high frequency electronic type that operates lamps above 40 kHz. In addition the ballast is thermally protected, and end of life feature shuts down the ballast upon lamp failure with auto restart to eliminate need to reset power after lamp replacement.

Labels

� cUL Listed for Damp Location

� cUL Listed wet location with select trims

� cUL Listed for Direct Contact with Insulation and combustible material

� cUL Listed for feed through Compliance

� State of California Title 24 High Efficacy Luminaire

� Washington State Energy Code

� New York State Energy Conservation Construction Code

� International Energy Conservation Code

� Energy Star Qualified

� Certified AIR-TITE under ASTME283