Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
5" Non-Insulated Ceiling Line Voltage Recessed Housing
 "HALO H5T 5\" Non-Insulated Ceiling Line Voltage Recessed Housing Incandescent")
HALO H5T
The Halo H5 series utilizes a 5� aperture designed to accommodate smaller sized PAR20 and PAR30 halogen lamps. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing.
� The 5" diameter trim size makes the H5T series the right choice for applications where dramatic yet inconspicuous lighting is required and higher wattages are desired. If fixture is used in insulated ceilings, insulation must be kept 3 inches away from all sides of fixture.
Housing
� Die-stamped 22 gauge CRS with white powder coat finish.Housing accommodates a wide range of Halo 5" trims. Torsion springs on all trims for quick and easy installation. Plaster Frame Galvanized steel construction. The housing can be removed from plaster frame to provide access to the junction box.
Plaster frame features include:
� Regressed locking screw for securing hanger bars
� Cutouts for easily crimping hanger bars in position
� Halo embossed on plaster frame Slide-N-Side� Junction Box
� UL/cUL Listed for through branch circuit wiring (maximum 8 No.12 ga., 90�C conductors).
� 1/2" trade size conduit knockouts with true pry-out slots positioned to accommodate straight conduit runs.
� Slide-N-Side� wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wide range of non-metallic sheathed cable.
� Allows wiring connections to be made outside the junction box
� Simply insert the cable directly into the trap after connections are made.
� Accommodates the following standard non-metallic sheathed cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
GOT NAIL! Pass-N-Thru� Bar Hangers.
� Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams.
� Score lines allow "tooless" shortening for 12" joists.
� Bar hangers can be repositioned 90� on plaster frame
� Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.
� Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails.
� Housing can be positioned at any point within 24" joist span
� Pass-N-Thru� feature allows bar hangers to be shortened without removing from plaster frame.
� Integral T-bar clip snaps onto Tbars no additional clips required.
Socket
� Porcelain socket with nickel plated brass screw shell, snaps into trim for consistent lamp positioning. Shipping insert protects socket from overspray.
Trims
� Housing accommodates a wide range of Halo 5" trims. Torsion springs on all trims for quick and easy installation.
� Fixed socket bracket aligns socket for consistent lamp position.
Thermal Protector
� Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping or incorrect application of insulation material.
Labels
� UL/cUL listed for damp location
� UL/cUL listed for Feed Through
� IP Rated
The Halo H5 series utilizes a 5� aperture designed to accommodate smaller sized PAR20 and PAR30 halogen lamps. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing.
� The 5" diameter trim size makes the H5T series the right choice for applications where dramatic yet inconspicuous lighting is required and higher wattages are desired. If fixture is used in insulated ceilings, insulation must be kept 3 inches away from all sides of fixture.
Housing
� Die-stamped 22 gauge CRS with white powder coat finish.Housing accommodates a wide range of Halo 5" trims. Torsion springs on all trims for quick and easy installation. Plaster Frame Galvanized steel construction. The housing can be removed from plaster frame to provide access to the junction box.
Plaster frame features include:
� Regressed locking screw for securing hanger bars
� Cutouts for easily crimping hanger bars in position
� Halo embossed on plaster frame Slide-N-Side� Junction Box
� UL/cUL Listed for through branch circuit wiring (maximum 8 No.12 ga., 90�C conductors).
� 1/2" trade size conduit knockouts with true pry-out slots positioned to accommodate straight conduit runs.
� Slide-N-Side� wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wide range of non-metallic sheathed cable.
� Allows wiring connections to be made outside the junction box
� Simply insert the cable directly into the trap after connections are made.
� Accommodates the following standard non-metallic sheathed cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
GOT NAIL! Pass-N-Thru� Bar Hangers.
� Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams.
� Score lines allow "tooless" shortening for 12" joists.
� Bar hangers can be repositioned 90� on plaster frame
� Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.
� Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails.
� Housing can be positioned at any point within 24" joist span
� Pass-N-Thru� feature allows bar hangers to be shortened without removing from plaster frame.
� Integral T-bar clip snaps onto Tbars no additional clips required.
Socket
� Porcelain socket with nickel plated brass screw shell, snaps into trim for consistent lamp positioning. Shipping insert protects socket from overspray.
Trims
� Housing accommodates a wide range of Halo 5" trims. Torsion springs on all trims for quick and easy installation.
� Fixed socket bracket aligns socket for consistent lamp position.
Thermal Protector
� Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping or incorrect application of insulation material.
Labels
� UL/cUL listed for damp location
� UL/cUL listed for Feed Through
� IP Rated
Accessories
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |
