HALO H995RICAT 4" LED LED Remodel IC AIR-TITE Housing
The Halo H995RICAT is a dedicated LED remodel small aperture
IC AIR-TITE housing for use with Halo RL4 Series LED modules. It is designed for installation into existing insulated ceilings where it will be in direct contact with insulation*. It is an AIR-TITE housing designed to prevent air flow between occupied spaces and
unconditioned areas. The LED connection is non-screw base to
preserve the high efficacy rating of the luminaire as used with the RL4 LED module.
•Slide-N-Side™ wire traps
•Quick Connect wiring connectors included in junction box
•AIR-TITE™ per ASTM E283
•Remodel springs accommodate 1/2" and 5/8" ceiling material
•Compatible with Halo RL460 Series LED modules
Single wall formed aluminum
construction. Openings are
gasketed for AIR-TITE installation.
5 1/2” height allows use in 2”x 6
joist construction. AIR-TITE
aperture gasket is pre-installed.
• Spring steel construction
designed for ease of installation
and ceiling support of LED driver.
• Four remodel clips secure
housing and accommodate
1/2” and 5/8” ceiling material.
• Seven 1/2” trade size conduit
knockouts with true pry-out slots
• Slide-N-Side™ connectors allow
non metallic sheathed cable to
be installed without tools and
without removing knockouts.
• Accepts a wide range of
non-metallic sheathed cables
- The standard cable types used
in lighting in both U.S. and
- Allows wiring connections to
be made outside the junction
- Simply insert the cable directly
into the trap after connections
- Accommodates the following
standard nonmetallic sheathed
US: #14/2, #14/3, #12/2, #12/3
Canada: #14/2, #14/3, #12/2
“Quick Connect” Connectors
Three quick connect wiring
LED Module Connection
Halo LED RL4 Series modules simply
install with a plug-in 120V line voltage
wiring connector (UL and CSA
Listed Luminaire Disconnect). This
non-screw-base LED connection
preserves the high efficacy rating of
the luminaire (see also LED Module
Cooper Lighting provides a five year
limited warranty on Halo RL4 LED
Luminaires which includes the LED
Recessed Housing, and LED module.
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Wet Location,
with select trims
• UL/cUL listed for Direct Contact
with insulation and combustible
• Use with designated RL4 LED
module for ENERGY STAR®
• Can be used for State of California
Title 24 high efficacy compliance
with designated LED module.
• Can be used for International
Energy Conservation Code (IECC)
high efficacy compliance with
designated LED module.
• Refer to RL4 LED module
specification sheets online
for compliance information.
IC and AIR-TITE™
Certified under ASTM-E283 and
listed UL/cUL 1598. May be used to
meet insulated ceiling* and restricted
air-flow requirements such as:
• Washington State Energy Code
• International Energy
Conservation Code (IECC)
• New York State Energy
• State of California Title 24
“Recessed Luminaires in
* Not to be used in direct contact
with spray foam insulation.