Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
5" Non-IC, Air-Tite, Remodel Housing
 "Halo E5RTAT 5\" Non-IC, Air-Tite, Remodel Housing")
The Halo E5 series consists of compact and efficient recessed housings
optimized and listed for PAR20 and PAR30, EISA compliant, tungsten halogen, CFL and LED lamps, as well as incandescent. The Halo E5
remodel housing is for use in non-insulated ceilings, suitable for
residential or light commercial applications; with airtight code
compliant construction. Use with a variety of trims and finishes to
create different lighting effects or to match any decor. This remodel
housing is designed for installation from below the finished ceiling.
As E5RTAT is for use in non-insulated ceilings, if insulation is
present it must be kept 3� from all sides of the housing. May be
retrofit with
HALO LED lighting systems.
Housing
� Single wall die-formed housing
� Housing features a precision rolled interlocking collar which maintains aperture geometry for greater assurance of installation results
� Integral Air-Tite gasket for code required gasket between fixture and finished ceiling - seals aperture without need for additional caulk
� Shipped with socket overspray protector installed
� For installation from below the finished ceiling. Integral flange secures fixture against ceiling
Remodel Retention System - Speed Clamps
� Exclusive two integral speed clamps securely lock housing to ceiling, accommodating 3/8� to 2� ceiling materials
� Use screwdriver or power driver to set clamps
Socket Plate
� Rigid socket plate adjusts and locks without tools for various lamp sizes.
� Socket plate and bracket may be removed when using socket supporting trims
Includes:
Remodel Speed Clamps
� (2) Exclusive integral speed clamps
� Speed clamp tabs securely lock to ceiling
� Speed clamps can be loosened for easy repositioning
� Speed clamps feature internal drive screws � a power screwdriver speeds installation
� Two-tier tabs adjust for 3/8� to 2� of various ceiling materials
Attached-Arm Design
� Attached arm gets into tight spaces
� Ease of installing through the ceiling aperture
� Smaller footprint for packing and distributor shelf space
Hinged junction box w/ Slide-N-Side�
� (4) �� conduit pry-outs
� (2) Slide-N-Side� Non-Metallic (NM) wire traps, allow wiring outside the box
� For 14-2, 14-3, 2-2, 12-3 U.S. and 14-2, 14-3, 12-2 Canadian
� Hinged door for easy access Quick Connect� Wiring Tray
� (3) Color coded push wire nuts in captive tray for one-handed connection
� Aids in speed & reliability
� Clear caps for wire connection visibility
cULus Listed
� Compact 10 in3 box volume
� Listed for maximum (6) No. 12 AWG or (8) No. 14 AWG 90? C splice conductors in box
Remodel Flange
� Die formed flange maintains precise whole circumference
� Integral flange secures fixture against the ceiling Air-Tite� code compliant
� Certified under ASTM E283
� Exclusive gasket seals aperture, frame & ceiling
� No additional caulk required
Socket
� Porcelain socket with nickel plated brass screw shell
� Socket snaps into socket plate for consistent lamp positioning
Thermal Protector
� Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping or
misapplied insulation
Trims
� Halo Fit-All concept offers multiple trim options in a variety of design styles, and functional beam distributions to control beam angle and lumen delivery in accommodating various lamp types including Halogen, CFL and LED
Compliance
� cULus Listed 1598 Luminaire
� cULus Listed Damp Location
� cULus Listed for Wet Location, covered ceiling, with select trims
� Air-Tite code compliant. Certified under ASTM E283; not exceeding 2.0 cfm (0.944 L/s) air leakage rate tested at a 1.57 psf (75 Pa) pressure differential
� RoHS compliant
HALO LED lighting systems.
Housing
� Single wall die-formed housing
� Housing features a precision rolled interlocking collar which maintains aperture geometry for greater assurance of installation results
� Integral Air-Tite gasket for code required gasket between fixture and finished ceiling - seals aperture without need for additional caulk
� Shipped with socket overspray protector installed
� For installation from below the finished ceiling. Integral flange secures fixture against ceiling
Remodel Retention System - Speed Clamps
� Exclusive two integral speed clamps securely lock housing to ceiling, accommodating 3/8� to 2� ceiling materials
� Use screwdriver or power driver to set clamps
Socket Plate
� Rigid socket plate adjusts and locks without tools for various lamp sizes.
� Socket plate and bracket may be removed when using socket supporting trims
Includes:
Remodel Speed Clamps
� (2) Exclusive integral speed clamps
� Speed clamp tabs securely lock to ceiling
� Speed clamps can be loosened for easy repositioning
� Speed clamps feature internal drive screws � a power screwdriver speeds installation
� Two-tier tabs adjust for 3/8� to 2� of various ceiling materials
Attached-Arm Design
� Attached arm gets into tight spaces
� Ease of installing through the ceiling aperture
� Smaller footprint for packing and distributor shelf space
Hinged junction box w/ Slide-N-Side�
� (4) �� conduit pry-outs
� (2) Slide-N-Side� Non-Metallic (NM) wire traps, allow wiring outside the box
� For 14-2, 14-3, 2-2, 12-3 U.S. and 14-2, 14-3, 12-2 Canadian
� Hinged door for easy access Quick Connect� Wiring Tray
� (3) Color coded push wire nuts in captive tray for one-handed connection
� Aids in speed & reliability
� Clear caps for wire connection visibility
cULus Listed
� Compact 10 in3 box volume
� Listed for maximum (6) No. 12 AWG or (8) No. 14 AWG 90? C splice conductors in box
Remodel Flange
� Die formed flange maintains precise whole circumference
� Integral flange secures fixture against the ceiling Air-Tite� code compliant
� Certified under ASTM E283
� Exclusive gasket seals aperture, frame & ceiling
� No additional caulk required
Socket
� Porcelain socket with nickel plated brass screw shell
� Socket snaps into socket plate for consistent lamp positioning
Thermal Protector
� Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping or
misapplied insulation
Trims
� Halo Fit-All concept offers multiple trim options in a variety of design styles, and functional beam distributions to control beam angle and lumen delivery in accommodating various lamp types including Halogen, CFL and LED
Compliance
� cULus Listed 1598 Luminaire
� cULus Listed Damp Location
� cULus Listed for Wet Location, covered ceiling, with select trims
� Air-Tite code compliant. Certified under ASTM E283; not exceeding 2.0 cfm (0.944 L/s) air leakage rate tested at a 1.57 psf (75 Pa) pressure differential
� RoHS compliant
