Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
6" Non-IC, Air-Tite, New Construction Housing, no Socket Bracket
 "Halo E7TATNB 6\" Non-IC, Air-Tite, New Construction Housing, no Socket Bracket")
The E7TATNB is a compact and efficient recessed Non-IC housing
optimized and listed for EISA compliant tungsten-halogen, CFL and LED
lamps as well as incandescent. Housing is suitable for residential or
light commercial applications. For installation in non-insulated
ceilings. If ceiling insulation is present, it must be kept 3� from all
sides of housing.
Housing features
Air-Tite code compliant construction. Use with a variety of trims and finishes to create different lighting effects or to match any decor. The E7TATNB can save installation time. It is designed without a socket plate for use with socket supporting trims only. With these trims there is no need to spend time removing the socket plate, and the fixed lamp position of the socket supporting trims saves on a lamp adjustment time too. May be retrofit with compatible HALO LED lighting systems.
Housing
� Single wall die-formed housing
� Housing features a precision rolled interlocking collar which maintains aperture geometry for greater assurance of installation results
� Integral Air-Tite gasket for code required gasket between fixture and finished ceiling - seals aperture without need for additional caulk
� May be removed from the plaster frame to provide access to junction box
Socket Plate
� Rigid socket plate adjusts and locks without tools for various lamp sizes.
� Socket plate and bracket may be removed when using socket supporting trims
Plaster Frame
� Galvanized steel frame. Housing adjusts in plaster frame to accommodate up to 3/8� - 1� ceiling thickness
� (2) Regressed locking screws for securing hanger bars
� Integral Air-Tite gasket seals housing and meets code-required gasket between fixture and finished ceiling
Includes:
Bar Hangers
All Nail!�
� Integral precisely positioned nail for engineered and natural framing
� Mini-foot leveling flange
� Integral T-Grid Clip, no accessory clips required q-Channel bars with Pass-N-Thru�
� Unique inverted �q� interlocking channel for rigidity and stability
� Pass-N-Thru� feature allows bars to cross-over for tool-less shortening in tight spaces Hinged junction box w/ Slide-N-Side�
� (4) �� conduit pry-outs
� (3) Slide-N-Side� Non-Metallic (NM) wire traps, allow wiring outside the box
� For 14-2, 14-3, 12-2, 12-3 U.S. and 14-2, 14-3, 12-2 Canadian
� Hinged door for easy access
� Box is repositionable 90? on frame to avoid obstructions
Quick Connect�
� (3) Push wire nuts included, for speed & reliability
� Clear caps for wire connection visibility
cULus Listed
� Compact 16 in3 volume
� Listed for max. (10) No. 12 AWG or (14) No. 14 AWG 90? C splice conductors in box Air-Tite� code compliant
� Certified under ASTM E283
� Exclusive gasket seals aperture, frame & ceiling
� No additional caulk required Socket
� Porcelain socket with nickel plated brass screw shell
� Snap-in socket speeds installation and attaches directly to the trim for consistent lamp positioning
Thermal Protector
� Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation
Trims
� Halo Fit-All concept offers multiple trim options in a variety of design styles, and functional beam distributions to control beam angle and lumen delivery in accommodating various lamp types including Halogen, CFL and LED
Compliance
� cULus Listed 1598 Luminaire
� cULus Listed Damp Location
� cULus Listed for Wet Location, covered ceiling, with select trims
� Air-Tite code compliant. Certified under ASTM E283; not exceeding 2.0 cfm (0.944 L/s) air leakage rate tested at a 1.57 psf (75 Pa) pressure differential
� RoHS compliant
Housing features
Air-Tite code compliant construction. Use with a variety of trims and finishes to create different lighting effects or to match any decor. The E7TATNB can save installation time. It is designed without a socket plate for use with socket supporting trims only. With these trims there is no need to spend time removing the socket plate, and the fixed lamp position of the socket supporting trims saves on a lamp adjustment time too. May be retrofit with compatible HALO LED lighting systems.
Housing
� Single wall die-formed housing
� Housing features a precision rolled interlocking collar which maintains aperture geometry for greater assurance of installation results
� Integral Air-Tite gasket for code required gasket between fixture and finished ceiling - seals aperture without need for additional caulk
� May be removed from the plaster frame to provide access to junction box
Socket Plate
� Rigid socket plate adjusts and locks without tools for various lamp sizes.
� Socket plate and bracket may be removed when using socket supporting trims
Plaster Frame
� Galvanized steel frame. Housing adjusts in plaster frame to accommodate up to 3/8� - 1� ceiling thickness
� (2) Regressed locking screws for securing hanger bars
� Integral Air-Tite gasket seals housing and meets code-required gasket between fixture and finished ceiling
Includes:
Bar Hangers
All Nail!�
� Integral precisely positioned nail for engineered and natural framing
� Mini-foot leveling flange
� Integral T-Grid Clip, no accessory clips required q-Channel bars with Pass-N-Thru�
� Unique inverted �q� interlocking channel for rigidity and stability
� Pass-N-Thru� feature allows bars to cross-over for tool-less shortening in tight spaces Hinged junction box w/ Slide-N-Side�
� (4) �� conduit pry-outs
� (3) Slide-N-Side� Non-Metallic (NM) wire traps, allow wiring outside the box
� For 14-2, 14-3, 12-2, 12-3 U.S. and 14-2, 14-3, 12-2 Canadian
� Hinged door for easy access
� Box is repositionable 90? on frame to avoid obstructions
Quick Connect�
� (3) Push wire nuts included, for speed & reliability
� Clear caps for wire connection visibility
cULus Listed
� Compact 16 in3 volume
� Listed for max. (10) No. 12 AWG or (14) No. 14 AWG 90? C splice conductors in box Air-Tite� code compliant
� Certified under ASTM E283
� Exclusive gasket seals aperture, frame & ceiling
� No additional caulk required Socket
� Porcelain socket with nickel plated brass screw shell
� Snap-in socket speeds installation and attaches directly to the trim for consistent lamp positioning
Thermal Protector
� Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation
Trims
� Halo Fit-All concept offers multiple trim options in a variety of design styles, and functional beam distributions to control beam angle and lumen delivery in accommodating various lamp types including Halogen, CFL and LED
Compliance
� cULus Listed 1598 Luminaire
� cULus Listed Damp Location
� cULus Listed for Wet Location, covered ceiling, with select trims
� Air-Tite code compliant. Certified under ASTM E283; not exceeding 2.0 cfm (0.944 L/s) air leakage rate tested at a 1.57 psf (75 Pa) pressure differential
� RoHS compliant
