HALO H457RTATE010 4-Inch LED Recessed Remodel Housing Non-Insulated Ceiling 2nd Generation
HALO LED H4 Series 2nd Generation
The Halo H4 LED is a family of 4� aperture recessed downlight
H457 series of housings designed for exclusive use with Halo
EL406, ELG406, ELSG406 Series LED Light Engines and compatible
4� TL4 and TLS4 LED trims. Halo H4 LED housings have integral
LED drivers that offer dimming as a standard feature.
This is a Non-IC, AIR-TITE� remodel housing designed for noninsulated
ceiling installations, universal voltage 120V-277V input,
and dimming with either 120V phase control dimmers, or 0-10V DC
control systems. The H4 LED series offers high quality downlighting along with
high efficacy � the result being great lighting and significant energy savings.
DESIGN FEATURES
MECHANICAL
(A) Housings
Single wall aluminum housing.
Openings are gasketed for AIR-TITE
installation. 5 1/2� height allows use
in 2"x 6 joist construction. AIR-TITE
aperture gasket is pre-installed.
(B) Remodel Arm
� Spring steel construction
designed for ease of installation
and ceiling support of LED driver.
MOUNTING
(C) Remodel Springs
� Four remodel clips secure
housing and accommodate
1/2� and 5/8� ceiling material.
ELECTRICAL
(D) Junction Box
� Seven 1/2" trade size conduit
knockouts with true pry-out slots
� Slide-N-Side� connectors allow
non metallic sheathed cable to
be installed without tools and
without removing knockouts.
� Accepts a wide range of
non-metallic sheathed cables
- The standard cable types used
in lighting in both U.S. and
Canada.
- Allows wiring connections to
be made outside the junction
box.
- Simply insert the cable directly
into the trap after connections
are made.
- Accommodates the following
standard nonmetallic sheathed
cable types:
US: #14/2, #14/3, #12/2, #12/3
Canada: #14/2, #14/3, #12/2
LED Connection
� LED connector is non-screw
base offering easy plug-in
installation with the H4 LED 2nd
Generation EL406, ELG406,
ELSG406 Series LED Light
Engines.
� LED connector meets highefficacy
luminaire requirement
for a non-screw base socket, and
where required to qualify as a
high-efficacy luminaire (California
Title-24).
LED Driver
� LED dimmable driver mounts to
the housing junction box.
� Driver is a120V-277V Universal
Voltage, high efficiency,
electronic power supply
providing low voltage power
to EL Series LED Light Engines.
� Driver meets FCC EMI/RFI
Consumer Level limits for use
in residential and commercial
installations.
� Driver features high power factor
and low THD and has integral
thermal protection in the event
of over temperature or internal
failure.
� Driver is specifically designed
for compatibility with EL406
LED Light Engines, and
ELG406, ELSG406 Adjustable
Gimbal Light Engine / Trims.
� If dimming is not required the
fixture can be operated from a
standard wall switch
Dimming - Phase Control
� The HALO H4 LED luminaire is
designed for dimming
capability to 10% in normal
operation with most 120V
leading edge (LE) and trailing
edge (TE) phase control
dimmers. (Consult dimmer
manufacturer for application/
compatibility/loading. Note,
some dimmers require a neutral
in the wallbox).
Dimming - 0-10V
� Dimmable to 10% in typical
operation with compatible 0-10V
DC low voltage dimmers.
� 0-10V DC dimmers operate using
two low voltage dimming wires
(color coded violet and gray).
The low voltage dimming wires
are separate from the 120V AC or
277V AC power.
� Switching on/off is controlled
via the line voltage (120V AC or
277V AC) power, and dimming
is controlled via the 2-wire 0-10V
DC low voltage
wiring.
Warranty
Cooper Lighting provides a five
year limited warranty on Halo LED
Luminaires which includes the
LED Recessed Housing, LED Light
Engine, and LED trims.
Labels
� UL/cUL Listed 1598 Luminaire
� UL/cUL Listed for Damp Location
� UL/cUL Listed for Wet Location,
covered ceiling - with select trims
Qualifications
� Use with designated LED light
engines and trims for ENERGY
STAR� qualification.**
� Can be used for State of California
Title 24 high efficacy luminaire
compliance**
� Can be used for Washington State
Energy Code (WSEC) and
International Energy Conservaction
Code (IECC) high efficacy luminaire
compliance
AIR-TITE
Certified under ASTM-E283 and
listed UL/cUL 1598. May be used to
meet restricted air-flow requirements
such as:
� Washington State Energy Code
(WSEC)
� International Energy
Conservation Code (IECC)
� New York State Energy
Conservation Construction
Code (NY-ECCC)
� State of California Title 24