Try Our New Website. Click Here * Under Construction *


Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!


Now We Have Lutron RA2 Select System in Stock Call or E-Mail for a quote

Please E-mail All Your Quote Requests to

[email protected]


4-Inch LED Recessed Housing New Construction Non-Insulated Ceiling,Chicago Plenum rated (Gen.2)

HALO H457TCPE010 4-Inch LED Recessed Housing New Construction Non-Insulated Ceiling,Chicago Plenum rated 2nd Generation
Item# HALOH457TCPE010
Click here to request a quote  or E-mail us at [email protected]

HALO H457TCPE010 4-Inch LED Recessed Housing

New Construction Non-Insulated Ceiling,Chicago Plenum rated 2nd Generation


DESIGN FEATURES


MECHANICAL


(A)Housings
Single wall die-formed construction.
� Constructed and gasketed to meet Chicago CCEA requirements
� Sealed flex connection from junction box to housing for Chicago Plenum rating.
� Openings are gasketed for AIR-TITE installation (in Non-IC ceilings)

(B) Plaster Frame
� Galvanized steel die-formed construction.
� Housing can be removed from plaster frame for access to junction box.
� Housing adjusts for ceilings up to 1-1/2� thickness.
� Plaster frame designed with removable bar hangers for installation in new construction.
� HALO identity embossed on plaster frame.

MOUNTING

(C) GOT NAIL! Pass -N-Thru� Bar Hangers
Bar Hanger Features include:
� Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams.
� Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.
� Automatic leveling flange aligns the housing and lets you hold the housing in place with one hand while driving nails.
� Housing can be positioned at any point within 24� joist span.
� Score lines allow �tool-less� shortening for 12� joists.
� Bar hangers may be repositioned 90�.
� Bar hangers do not need to be removed from frame for shortening.
� Integral T-bar clips snaps onto T-bars - no additional clips required.

ELECTRICAL

(D) Junction Box
� Positioned to accommodate straight conduit runs.
� Seven 1/2� trade size conduit knockouts with true pry-out slots.
� Slide-N-Side� connectors allow non metallic sheathed cable to be installed without tools and without removing knockouts.
� Accepts a wide range of non-metallic sheathed cables.
- The standard cable types used in lighting in both U.S. and Canada.
- Allows wiring connections to be made outside the junction box.
- Simply insert the cable directly into the trap after connections are made.
- Accommodates the following standard nonmetallic sheathed cable types:
US: #14/2, #14/3, #12/2, #12/3
Canada: #14/2, #14/3, #12/2

(E) LED Light Engine Connection
� LED connector is a non-screw base connector offering easy installation with the H4 LED 2nd Generation EL406, ELG406, ELSG406 Series LED Light Engines.
� LED connector meets high-efficacy luminaire requirement for a non- screw base socket, and where required to qualify as a high- efficacy luminaire (California Title-24).

(F) LED Driver
� LED dimmable driver mounts to the housing junction box.
� Driver is a120V-277V Universal Voltage, high efficiency, electronic power supply providing low voltage power to EL Series LED Light Engines.
� Driver meets FCC EMI/RFI Consumer Level limits for use in residential and commercial installations.
� Driver features high power factor and low THD, and has integral thermal protection in the event of over temperature or internal failure.
� Driver is specifically designed for compatibility with EL406 LED Light Engines, and ELG406, ELSG406 Adjustable Gimbal Light Engine / Trims.
� If dimming is not required the fixture can be operated from a standard wall switch.

Dimming - Phase Control
� The HALO H4 LED luminaire is designed for dimming capability to 10% in normal operation with most 120V leading edge (LE) and trailing edge (TE) phase control dimmers. (Consult dimmer manufacturer for application/ compatibility/loading. Note, some dimmers require a neutral in the wallbox).

Dimming - 0-10V
� Dimmable to 10% in typical operation with compatible 0-10V DC low voltage dimmers.
� 0-10V DC dimmers operate using two low voltage dimming wires (color coded violet and gray).
The low voltage dimming wires are separate from the 120V AC or 277V AC power.
� Switching on/off is controlled via the line voltage (120V AC or 277V AC) power, and dimming is controlled via the 2-wire 0-10V DC low voltage wiring.

Warranty
Cooper Lighting provides a five year limited warranty on Halo LED Luminaires which includes the LED Recessed Housing, LED Light Engine, and LED trims.

Labels
� UL/cUL Listed 1598 Luminaire
� UL/cUL Listed for Damp Location
� UL/cUL Listed for Wet Location, covered ceiling - with select trims
� Meets Chicago Plenum Requirments

Qualifications
� Use with designated LED light engines and trims for ENERGY STAR qualification.**
� Can be used for State of California � Title 24 high efficacy luminaire compliance**
� Can be used for Washington State Energy Code (WSEC) and International Energy Conservaction Code (IECC) high efficacy luminaire Compliance

AIR-TITE�
Certified under ASTM-E283 and listed UL/cUL 1598. May be used to meet restricted air-flow requirements such as:
� Washington State Energy Code (WSEC)
� International Energy Conservation Code (IECC)
� New York State Energy Conservation Construction Code (NY-ECCC)
� State of California Title 24

**Refer to ENERGY STAR � Qualified Products List and CEC (T24) Appliance Database for listings.