Call 818-477-4017 | Mon-Fri 6AM-4PM PST

Halo Home HIWAC1BLE40AWH  In-wall Accessory Dimmer - Ready Wholesale Electric Supply and Lighting

Halo Home HIWAC1BLE40AWH In-wall Accessory Dimmer

HALO HOME | Products |
SKU: HALO-HIWAC1BLE40AWH


 

  • ON/OFF and Dimming; Group, Scene and Schedule in app
  • Works with HALO Home Smart LED lighting fixtures
  • Can control any HALO Home light within the mesh network
  • Combine w/ another Accessory Dimmer for 3 way use w/ Halo Home lights
  • Includes air gap switch to disconnect power
  • 120V / AC 60Hz standard house wiring
  • Max 300W LED
  • Neutral wire required ; indoor use only
  • Title 24 and Title 20 compliant

Halo Home HIWAC1BLE40AWH In-wall Accessory Dimmer
The HALO Home In-Wall Accessory Dimmer controls your HALO Home lighting devices from a central location. The Accessory Dimmer is designed to connect to the HALO Home Bluetooth Mesh network with no hub or internet connection required. The Accessory Dimmer can occupy any position in a multi-gang junction box, while the other positions of the junction box can be occupied by switches or other dimmers. The Accessory Dimmer can operate as a single switch, and can also be configured to work with the HALO Home In-wall Smart Dimmer to operate as a 3-Way, or multi-switch.


Features
•ON/OFF and Dimming; Group, Scene and Schedule in app
•Works with HALO Home Smart LED lighting fixtures
•Can control any HALO Home light within the mesh network
•Combine w/ another Accessory Dimmer for 3 way use w/ Halo Home lights
•Includes air gap switch to disconnect power
•120V / AC 60Hz standard house wiring
•Max 300W LED
•Neutral wire required ; indoor use only
•Title 24 and Title 20 compliant


Description
The HALO Home In-Wall Accessory Dimmer controls your HALO Home lighting devices from a central location. The Accessory Dimmer is designed to connect to the HALO Home Bluetooth Mesh network with no hub or internet connection required. The Accessory Dimmer can occupy any position in a multi-gang junction box, while the other positions of the junction box can be occupied by switches or other dimmers. The Accessory Dimmer an operate as a single switch, and can also be configured to work with the HALO


Specification Features
Wireless System
• Utilizes Bluetooth Mesh 4.0
• Wireless range of up to 100 feet from Bluetooth device to device and up to 33 feet from Bluetooth smartphone/tablet to closest device.
• 2.4GHz signal frequency


Wireless Pairing
• See Halo quick start guide for wireless setup, guidance and troubleshooting.


Features
• Control HALO Home smart lights with the switch or free HALO Home app
• Features ON/OFF, Dimming Groups, Schedules, and Scenes
• Works with HALO Home smart LED lights only


Environmental
• Rated for Indoor Use only. 32°F to 104°F (0°C to 40°C) damp locations


Design Features
• Range: Up to 100 feet line of sight
• Dimmer to have four 6” pre-stripped wire leads for line (black), load (red), ground (green) and neutral (white)
• Air-gap switch disconnects power from load forcing an OFF condition to safely work on the light fixtures.
• Air-gap switch will also disconnect power from the internal circuitry of the dimmer.
• Air-gap switch is a 1 way switch – power is connected through the airgap switch when the air-gap plastic is in, and power does not go through the air-gap switch when the air-gap plastic is pulled out.
• Neutral wire will be required for installation
• Large paddle switch that actuates 2 switches. Upper part of paddle actuates one switch ON, and lower part of paddle actuates the other switch OFF for ON and OFF functions listed below.
• Thin dimmer rocker switch that also actuates 2 more switches. Upper part of rocker actuates one switch Brighten, and lower part of paddle actuates the other switch Dim for Brighten and Dim functions listed below.
• One status LED under firmware control
• Dimming state shall be retained in the event of AC power loss.
• Acoustic noise not to exceed 22 dBa SPL at 1 ft


Button Functions
• Dim up (Brighten) will brighten the lamps associated to the Smart Dimmer
• Dim down will dim the lamps associated to the Smart Dimmer
• ON will turn on the lamps associated to the Smart Dimmer
• OFF will turn off the lamps associated to the Smart Dimmer
• Holding the ON button for 12 seconds will factory reset the dimmer and it will also be in Bluetooth pairing mode.


Certifications & Compliance
• cULus Listed, NOM Certified. Complies with FCC Part 15, Class B
• Industry Canada RSS-Gen and RSS-247
• Title 24 and Title 20 Compliant
• NEMA SSL 7A Compliant type 1 Dimmer
• Bluetooth Certification 4.1 or higher + Mesh
• ROHS-2

Download Spec Sheet

 

Please Contact Us For Prices. 1-818-881-1818. quote@readywholesaleelectric.com