Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
4" LED Retrofit Baffle-Trim Kit,4000K,589Lum,90 CRI,Matte White
 "HALO LT460WH6940 4\" LED Retrofit Baffle-Trim Kit,4000K,589Lum,90 CRI,Matte White")
HALO LT460WH6940 4" LED Retrofit Baffle-Trim Kit,4000K,589Lum,90 CRI,Matte White
n style="font-weight: bold;">MECHANICAL
Module-Trim
� Module construction includes LED, heat sink, reflector, lens, baffle and trim ring
� Regressed baffle
� Heat sink designed to conduct heat away from the LED keeping the junction temperatures below specified maximums, even when installed in insulated ceiling environments
Lens
� Regressed lens
� Impact-resistant polycarbonate
� Convex form for lamp-like appearance
� High lumen transmission
� Diffusing for even illumination
Mounting
� Push-N-Twist universal installation clips
� Clips are pre-installed and designed to fit 4" compatible recessed housings
Housing Compatibility
*See Housing Compatibility section.
LED
� Color Temperature (CCT)� : 4000K
� Color Rendering Index (CRI)� : 90
� 90 CRI can be used for California Title 24 Compliance / Certified to Title 20.
LED Chromaticity
� A tight chromaticity specification ensures LED color uniformity, sustainable Color Rendering Index (CRI) and Correlated Color Temperature (CCT) over the useful life of the LED
� LED chromaticity of 3 SDCM exceeds ENERGY STAR� color standards per ANSI C78.377-2008
� High color performance with R9 greater than 50
ELECTRICAL
Power Connections
� LED connector is a non-screw base luminaire disconnect offering easy installation with Halo H995 Series LED housings
� LED Connector meets California Title-24 high efficacy luminaire requirement for a non-screw base socket, and where required to qualify as a high efficacy luminaire
� The included E26 medium screwbase Edison adapter provides easy retrofit of incandescent housings (see Housing Compatibility)
Ground Connection
Separate grounding cable included on the LT4 module for attachment to the housing during installation.
LED Driver
� 120V 50/60 Hz constant current dimmable driver provides highefficiency operation
� Driver meets FCC 47CFR Part 15 EMI/RFI consumer limits for use in residential and commercial installations
� Driver features high power factor and low THD and has integral thermal protection in the event of over temperature or internal failure
� If dimming is not required the fixture can be operated from a standard wall switch
Dimming
� Designed for continuous dimming capability to nominally 10% with many 120V Leading Edge (LE) and Trailing Edge (TE) Phase Control dimmers. (Dimmers with low end trim adjustment offer greater assurance of achieving 10% level.)
� Consult dimmer manufacturer for compatibility and conditions of use.
Note: some dimmers require a neutral in the wallbox.
Warranty
Cooper Lighting provides a five year limited warranty on the LT4 LED.
Compliance
� UL/cUL Listed 1598 Luminaire (with listed housings)
� UL Classified (with other housings - see Housing Compatibility)
� UL/cUL Listed for Damp Location
� UL/cUL Listed for Wet Location � Shower Applications, covered ceiling only.
� May be installed in IC rated housings in direct contact with air-permeable insulation** and combustible material
� Airtight certified per ASTM E283 (not exceeding 2.0 CFM under 75 Pascals pressure difference)
� Can be used to comply with California Title 24 High Efficacy requirements. Certified to California Title 20 Appliance Efficiency Database.*
� Can be used for International Energy Conservation Code (IECC) high efficiency luminaire compliance.
� Can be used for Washington State Energy Code compliance
� ENERGY STAR� Certified luminaire - consult ENERGY STAR� Certified Product List*
� EMI/RFI per FCC 47CFR Part 15 Class B Consumer limits, suitable for use in residential and commercial installations
� Contains no mercury or lead and RoHS compliant.
� Photometric testing in accordance with IES LM-79
� Lumen maintenance projections in accordance with IES LM-80 and TM-21
� Suitable for use in closets. Compliant with NFPA 70, NEC Sec. 410.16 (A)(1) and 410.16 (C)(3).
*Housing Compatibility
Compatible Halo LED Housings with LED luminaire connector (high-efficacy compliant - Title 24)
HALO LED Recessed Can Size Catalog Number 4" H995ICAT, H995RICAT
Compatible Halo Incandescent E26 Screwbase Housings
HALO 4" H99ICAT, H99RTAT, H99TAT, E4ICATSB, E4TATSB, E4RTATSB
Compatible All-Pro Incandescent E26 Screwbase Housings
ALL-PRO 4" ET400ATSB, ET400RATSB, ET400ATSB
n style="font-weight: bold;">MECHANICAL
Module-Trim
� Module construction includes LED, heat sink, reflector, lens, baffle and trim ring
� Regressed baffle
� Heat sink designed to conduct heat away from the LED keeping the junction temperatures below specified maximums, even when installed in insulated ceiling environments
Lens
� Regressed lens
� Impact-resistant polycarbonate
� Convex form for lamp-like appearance
� High lumen transmission
� Diffusing for even illumination
Mounting
� Push-N-Twist universal installation clips
� Clips are pre-installed and designed to fit 4" compatible recessed housings
Housing Compatibility
*See Housing Compatibility section.
LED
� Color Temperature (CCT)� : 4000K
� Color Rendering Index (CRI)� : 90
� 90 CRI can be used for California Title 24 Compliance / Certified to Title 20.
LED Chromaticity
� A tight chromaticity specification ensures LED color uniformity, sustainable Color Rendering Index (CRI) and Correlated Color Temperature (CCT) over the useful life of the LED
� LED chromaticity of 3 SDCM exceeds ENERGY STAR� color standards per ANSI C78.377-2008
� High color performance with R9 greater than 50
ELECTRICAL
Power Connections
� LED connector is a non-screw base luminaire disconnect offering easy installation with Halo H995 Series LED housings
� LED Connector meets California Title-24 high efficacy luminaire requirement for a non-screw base socket, and where required to qualify as a high efficacy luminaire
� The included E26 medium screwbase Edison adapter provides easy retrofit of incandescent housings (see Housing Compatibility)
Ground Connection
Separate grounding cable included on the LT4 module for attachment to the housing during installation.
LED Driver
� 120V 50/60 Hz constant current dimmable driver provides highefficiency operation
� Driver meets FCC 47CFR Part 15 EMI/RFI consumer limits for use in residential and commercial installations
� Driver features high power factor and low THD and has integral thermal protection in the event of over temperature or internal failure
� If dimming is not required the fixture can be operated from a standard wall switch
Dimming
� Designed for continuous dimming capability to nominally 10% with many 120V Leading Edge (LE) and Trailing Edge (TE) Phase Control dimmers. (Dimmers with low end trim adjustment offer greater assurance of achieving 10% level.)
� Consult dimmer manufacturer for compatibility and conditions of use.
Note: some dimmers require a neutral in the wallbox.
Warranty
Cooper Lighting provides a five year limited warranty on the LT4 LED.
Compliance
� UL/cUL Listed 1598 Luminaire (with listed housings)
� UL Classified (with other housings - see Housing Compatibility)
� UL/cUL Listed for Damp Location
� UL/cUL Listed for Wet Location � Shower Applications, covered ceiling only.
� May be installed in IC rated housings in direct contact with air-permeable insulation** and combustible material
� Airtight certified per ASTM E283 (not exceeding 2.0 CFM under 75 Pascals pressure difference)
� Can be used to comply with California Title 24 High Efficacy requirements. Certified to California Title 20 Appliance Efficiency Database.*
� Can be used for International Energy Conservation Code (IECC) high efficiency luminaire compliance.
� Can be used for Washington State Energy Code compliance
� ENERGY STAR� Certified luminaire - consult ENERGY STAR� Certified Product List*
� EMI/RFI per FCC 47CFR Part 15 Class B Consumer limits, suitable for use in residential and commercial installations
� Contains no mercury or lead and RoHS compliant.
� Photometric testing in accordance with IES LM-79
� Lumen maintenance projections in accordance with IES LM-80 and TM-21
� Suitable for use in closets. Compliant with NFPA 70, NEC Sec. 410.16 (A)(1) and 410.16 (C)(3).
*Housing Compatibility
Compatible Halo LED Housings with LED luminaire connector (high-efficacy compliant - Title 24)
HALO LED Recessed Can Size Catalog Number 4" H995ICAT, H995RICAT
Compatible Halo Incandescent E26 Screwbase Housings
HALO 4" H99ICAT, H99RTAT, H99TAT, E4ICATSB, E4TATSB, E4RTATSB
Compatible All-Pro Incandescent E26 Screwbase Housings
ALL-PRO 4" ET400ATSB, ET400RATSB, ET400ATSB
