HALO ML5606827 (27/30/35/40) 5"&6" LED MODULE 600 Lumens 80 CRI
Description
The Halo ML56 LED Downlighting System is a series of modular LED Light Modules for use with
designated 5� or 6� ML56 LED trims in new construction, remodel and retrofit installation.
Compatible with Halo 5� H550 and 6� H750, H2750 Series LED housings. And in retrofit of existing
housings the ML56 Series fits 5" or 6" Halo, All-Pro, and others. ML56 system offers shallow
trims for installation in Halo, All-Pro and others shallow housings. ML56 Light Modules are
offered in 600 Series, 900 Series, and 1200 Series, 80CRI or 90CRI, and four color temperatures
2700K, 3000K, 3500K, 4000K. ML56 Light Modules are universal voltage 120V � 277V and dimmable
at 120V. The ML56 lens provides uniform diffuse illumination standard.
Specification Features
Mechanical
Light Module
� Module includes LED package, LED driver,
heat sink, and lens
� Durable die-cast aluminum construction.
� Heat sink designed to conduct heat away
from the LED keeping the junction temperatures
below specified maximums, including
insulated ceiling environments
Lens
� Impact-resistant polycarbonate
� Convex form for lamp-like appearance
� High lumen transmission
� Diffusing for even illumination
Mounting
� Light Modules attach to reflector and baffle
trims via locking tabs, and attach to eyeballs
via keyed twist-to-lock mating bosses
� The complete light module and trim assembly
installs into housings with precision
formed torsion springs located on the trim
� Friction Blade mounting is an alternate
option using the accessory 6� Friction Blade
Kit model ML56CLIP (order separately).
Friction blades provide alternative to torsion
springs for retrofit in 6� housings
without torsion mounting tabs. The stainless
steel friction blades allow the ML56 to
be installed in a wider range of housings,
and allow rotation in the housing aperture
(360 degrees).
Housing Compatibility
A complete ML56 system includes a LED
Light Module, LED trim, and a compatible
housing (new construction, remodel, or existing
retrofit). Housing compatibility in the
ML56 System is determined by the ML56 trim
dimensions. ML56 trims are available in 5�
and 6� aperture (5� = 59xx series and 6� =
69xx series trims). Refer to Housing � Trim
Section in this document.
LED
� 600 Series = 600 design lumens typical.
� Delivered lumens vary depending upon CRI,
color temperature, and trim finish.
� Color Temperature options: 2700K, 3000K,
3500K, 4000K
� CRI: 80
� L70 at 50,000 hours, projected in accordance
with IES TM-21
� LED is a chip on board design consisting
of a multiple LED package to create one
virtual light source for a productive �cone
of light�
Color Specification & Quality Standards
� A tight chromaticity specification ensures
LED color uniformity, sustainable Color
Rendering Index (CRI) and Correlated Color
Temperature (CCT) over the useful life of
the LED
� LED color uniformity of 3 SDCM, exceeds
ENERGY STAR� color standards per ANSI
C78.377- 2008.
� Every Halo LED Light Module is quality tested
and performance measured, and then
serialized in a permanent record to register
lumens, wattage, CRI and CCT.
� Halo LED serialized testing and measurement
process ensures color and lumen consistency
on a per-unit basis, and validates
long-term product consistency over time
� Halo ML56 LED Light Modules include
lumen, CRI, and CCT designations in the
model number
� Example: ML5606830
56 = 5� / 6� aperture series
06 = 600 lumen series
8 = >80 CRI
30 = 3000K nominal CCT
Electrical Power Connections
� LED connector is a non-screw base luminaire
disconnect offering easy installation
with the matching Halo 5� H550 series
and 6� H750 and H2750 series housings
(housing selected depends upon LED trim
5� or 6�).
� LED Connector is a non-screw base, and
where required to qualify as a high-efficacy
luminaire.
� The included E26 medium screw-base
Edison adapter provides easy retrofit
of incandescent housings (see Housing
Section).
Ground Connection
Separate grounding cable included on the
module for attachment to the housing during
installation.
LED Driver
� Driver is universal voltage 120V-277V, and
may be controlled from a switch in this
range of main inputs (switchable at 120V,
220V, 230V, 240V, and 277V)
� Driver is dimmable at 120V operation when
connected to a compatible dimmer.
� Driver is a high efficiency, electronic power
supply providing DC power to the LED.
� Driver meets FCC EMI/RFI Consumer Level
limits on 120V main inputs, and is compliant
for use in residential and commercial
installations.
� Driver features high power factor, low
THD, and has integral thermal protection in
the event of over temperature or internal
failure.
� Driver is replaceable, if replacement should
be required.
Dimming
Designed for dimming capability to nominal
5% in normal operation with standard 120V
Leading Edge (LE) and Trailing Edge (TE)
phase control dimmers. (Consult dimmer
manufacturer for dimmer compatibility and
details. Note, some dimmers require a neutral
in the wallbox.)
Warranty
Cooper Lighting provides a (5) five year limited
warranty on the Halo ML56 LED Light Module.
LED Module in New or Retrofit Existing
Construction � Housings other than Halo
or All-Pro
� If used in recessed housings other than
Halo or All-Pro the Cooper Lighting 5-year
limited warranty applies to the LED Light
Module and Trim only.
� As with any electrical installation, a qualified
electrician must ensure compatibility of
use with a particular housing; this includes
all applicable national and local electrical
and building codes. Installer is responsible
to properly and securely retain the LED
Module and LED Trim in the housing at time
of installation.
Compliance
� cULus listed 1598 Luminaire (Halo and All-Pro housings)
� UL Classified when used in retrofit (refer to housing
section)
� cULus listed for damp locations
� cULus Wet location listed with baffle and reflector trims
only
� Airtight certified per ASTM E283 (not exceeding 2.0 CFM
under 57 Pascals pressure difference)
� IP66 ingress protection rated with baffle and reflector trims
only
� RoHS compliant
� May be used in IC (insulated ceiling) housings in direct
contact with insulation* and combustible material
� Can be used as a California Title 24 compliant Non-
Residential LED Luminaire
� Can be used for International Energy Conservation Code
(IECC) high efficiency luminaire compliance.
� Can be used for Washington State Energy Code compliance
� ENERGY STAR� certified luminaire - consult ENERGY
STAR� Certified product list
� EMI/RFI per FCC 47CFR Part 15 Class B Consumer limits
(commercial and residential compliant)
� Photometric testing in accordance with IES LM-79
� Lumen maintenance projections in accordance with IES
LM-80 and TM-21
� CE Mark - �Conformit� Europ�ene� conformity with the
Council of European Communities Directives, meeting
internationally recognized compliance when used with Halo
H550, H750, and H2750 Series LED housings only
Refer to ENERGY STAR� Certified Products List.
Can be used to comply with California Title 24 Non-Residential Lighting Controls requirements as a LED Luminaire
* Not for use with housings in direct
contact with spray foam insulation.