Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
5"&6" LED MODULE 900 Lumens 90 CRI DIM-TO-WARM 3000K-1850K
HALO ML5609D2W930 5"&6" LED MODULE 900 Lumens 90 CRI DIM-TO-WARM 3000K-1850K
Description The ML56 LED downlight system is a flexible solution for your recessed lighting needs. High color fidelity 90 CRI modules are available in three lumen outputs and four color temperatures and because they are compatible with Halo LED housing and many other existing screw based housings, the ML56 LED system can be used in remodel, retrofit and new construction installations. An optional dim-to-warm (D2W�) feature creates an additional lighting solution as it provides a smooth warm transition from 3000K to 1850K when dimmed.
Specification Features Mechanical Light Module � Module includes LED package, LED driver, heat sink, and lens � Durable die-cast aluminum construction. � Heat sink designed to conduct heat away from the LED keeping the junction temperatures below specified maximums, including insulated ceiling environments Lens � Impact-resistant polycarbonate � Convex form for lamp-like appearance � High lumen transmission Mounting � Modules attach to reflector and baffle trims via locking tabs, and attach to eyeballs via keyed twist-to-lock mating bosses � The complete module and trim assembly installs into housings with precision formed torsion springs located on the trim � Friction Blade mounting is an alternate option using the accessory 6� Friction Blade Kit model ML56CLIP (order separately). Friction blades provide alternative to torsion springs for retrofit in 6� housings without torsion mounting tabs. ML56CLIP is compatible with 6" baffle and reflector trims only (691, 692, 693, 695, 696 series). For eyeball trim (694 series) use ML7RAB retrofit adapter band. � Diffusing for even illumination Housing Compatibility A complete ML56 system includes a LED Module, LED trim, and a compatible housing (new construction, remodel, or existing retrofit). Housing compatibility in the ML56 System is determined by the ML56 trim dimensions. ML56 trims are available in 5� and 6� aperture (5� = 59xx series and 6� = 69xx series trims). Refer to Housing � Trim Section in this document. LED � 900 Series = 900 design lumens typical. � Delivered lumens vary depending upon 5" or 6", color temperature, and trim finish. � Color Temperature options: 2700K, 3000K, 3500K, 4000K � Dim-to-warm (D2W) Option: 3000K, shifts to 1850K as it DIMS CRI>90 throughout dimming range � CRI: 90, R9>50 � L70 at 50,000 hours, projected in accordance with IES TM-21 Color Specification & Quality Standards � A tight chromaticity specification ensures LED color uniformity, sustainable Color Rendering Index (CRI) and Correlated Color Temperature (CCT) over the useful life of the LED � LED color uniformity of 3 SDCM exceeds ENERGY STAR� color standards per ANSI C78.377- 2008. � High color performance which maintains 90CRI and R9>50 throughout dimming range. � Every Halo Module is quality tested and performance measured, and then serialized in a permanent record to register lumens, wattage, CRI and CCT. � Halo LED serialized testing and measurement process ensures color and lumen consistency on a per-unit basis, and validates long-term product consistency over time � ML56 LED Modules include lumen, CRI, and CCT in the model number � Example: ML5609930 56 = 5� / 6� aperture series 09 = 900 lumen series 9 = >90 CRI 30 = 3000K nominal CCT Electrical Power Connections � LED connector is a non-screw base luminaire disconnect offering easy installation with the matching Halo 5� H550 series and 6� H750 and H2750 series housings (housing selected depends upon LED trim 5� or 6�). � LED Connector is a non-screw base, and where required to qualify as a high-efficacy luminaire. � The included E26 medium screw-base Edison adapter provides easy retrofit of incandescent housings (see Housing Section). Ground Connection Separate grounding cable included on the module for attachment to the housing during installation. LED Driver � Driver is universal voltage 120V-277V, and may be controlled from a switch in this range of main inputs (switchable at 120V, 220V, 230V, 240V, and 277V) � Driver is dimmable at 120V operation when connected to a compatible dimmer. � Driver is a high efficiency, electronic power supply providing DC power to the LED. � Driver meets FCC EMI/RFI Consumer Level limits on 120V main inputs, and is compliant for use in residential and commercial installations. � Driver features high power factor, low THD, and has integral thermal protection in the event of over temperature or internal failure. � Driver is replaceable, if replacement should be required. Dimming Designed for dimming capability to nominal 5% in normal operation with standard 120V Leading Edge (LE) and Trailing Edge (TE) phase control dimmers. (Consult dimmer manufacturer for dimmer compatibility and details. Note, some dimmers require a neutral in the wallbox.) Warranty Eaton provides a (5) five year limited warranty on the Halo ML56 LED Module. LED Module in New or Retrofit Existing Construction � Housings other than Halo � If used in recessed housings other than Halo the Eaton 5-year limited warranty applies to the LED Module and Trim only. � As with any electrical installation, a qualified electrician must ensure compatibility of use with a particular housing; this includes all applicable national and local electrical and building codes. Installer is responsible to properly and securely retain the LED Module and LED Trim in the housing at time of installation. Compliance � cULus listed 1598 Luminaire (Halo housings) � UL Classified when used in retrofit (refer to housing section) � cULus listed for damp locations � cULus Wet location listed with baffle and reflector trims only � Airtight certified per ASTM E283 (not exceeding 2.0 CFM under 57 Pascals pressure difference) � IP66 ingress protection rated with baffle and reflector trims only � RoHS compliant � May be used in IC (insulated ceiling) housings in direct contact with insulation* and combustible material � Can be used for California Title 24 compliance / Title 20 certified � Can be used for International Energy Conservation Code (IECC) high efficiency luminaire compliance. � Can be used for Washington State Energy Code compliance � ENERGY STAR� certified luminaire - consult ENERGY STAR� Certified product list � EMI/RFI per FCC 47CFR Part 15 Class B Consumer limits (commercial and residential compliant) � Photometric testing in accordance with IES LM-79 � Lumen maintenance projections in accordance with IES LM-80 and TM-21 � CE Mark - �Conformit� Europ�ene� conformity with the Council of European Communities Directives, meeting internationally recognized compliance when used with Halo H550, H750, and H2750 Series LED housings only Not for use with housings in direct contact with spray foam insulation. Refer to ENERGY STAR� Certified Products List. Can be used to comply with California Title 24 High Efficacy requirements. Certified to California Title 20 Appliance Efficiency Database.
Description The ML56 LED downlight system is a flexible solution for your recessed lighting needs. High color fidelity 90 CRI modules are available in three lumen outputs and four color temperatures and because they are compatible with Halo LED housing and many other existing screw based housings, the ML56 LED system can be used in remodel, retrofit and new construction installations. An optional dim-to-warm (D2W�) feature creates an additional lighting solution as it provides a smooth warm transition from 3000K to 1850K when dimmed.
Specification Features Mechanical Light Module � Module includes LED package, LED driver, heat sink, and lens � Durable die-cast aluminum construction. � Heat sink designed to conduct heat away from the LED keeping the junction temperatures below specified maximums, including insulated ceiling environments Lens � Impact-resistant polycarbonate � Convex form for lamp-like appearance � High lumen transmission Mounting � Modules attach to reflector and baffle trims via locking tabs, and attach to eyeballs via keyed twist-to-lock mating bosses � The complete module and trim assembly installs into housings with precision formed torsion springs located on the trim � Friction Blade mounting is an alternate option using the accessory 6� Friction Blade Kit model ML56CLIP (order separately). Friction blades provide alternative to torsion springs for retrofit in 6� housings without torsion mounting tabs. ML56CLIP is compatible with 6" baffle and reflector trims only (691, 692, 693, 695, 696 series). For eyeball trim (694 series) use ML7RAB retrofit adapter band. � Diffusing for even illumination Housing Compatibility A complete ML56 system includes a LED Module, LED trim, and a compatible housing (new construction, remodel, or existing retrofit). Housing compatibility in the ML56 System is determined by the ML56 trim dimensions. ML56 trims are available in 5� and 6� aperture (5� = 59xx series and 6� = 69xx series trims). Refer to Housing � Trim Section in this document. LED � 900 Series = 900 design lumens typical. � Delivered lumens vary depending upon 5" or 6", color temperature, and trim finish. � Color Temperature options: 2700K, 3000K, 3500K, 4000K � Dim-to-warm (D2W) Option: 3000K, shifts to 1850K as it DIMS CRI>90 throughout dimming range � CRI: 90, R9>50 � L70 at 50,000 hours, projected in accordance with IES TM-21 Color Specification & Quality Standards � A tight chromaticity specification ensures LED color uniformity, sustainable Color Rendering Index (CRI) and Correlated Color Temperature (CCT) over the useful life of the LED � LED color uniformity of 3 SDCM exceeds ENERGY STAR� color standards per ANSI C78.377- 2008. � High color performance which maintains 90CRI and R9>50 throughout dimming range. � Every Halo Module is quality tested and performance measured, and then serialized in a permanent record to register lumens, wattage, CRI and CCT. � Halo LED serialized testing and measurement process ensures color and lumen consistency on a per-unit basis, and validates long-term product consistency over time � ML56 LED Modules include lumen, CRI, and CCT in the model number � Example: ML5609930 56 = 5� / 6� aperture series 09 = 900 lumen series 9 = >90 CRI 30 = 3000K nominal CCT Electrical Power Connections � LED connector is a non-screw base luminaire disconnect offering easy installation with the matching Halo 5� H550 series and 6� H750 and H2750 series housings (housing selected depends upon LED trim 5� or 6�). � LED Connector is a non-screw base, and where required to qualify as a high-efficacy luminaire. � The included E26 medium screw-base Edison adapter provides easy retrofit of incandescent housings (see Housing Section). Ground Connection Separate grounding cable included on the module for attachment to the housing during installation. LED Driver � Driver is universal voltage 120V-277V, and may be controlled from a switch in this range of main inputs (switchable at 120V, 220V, 230V, 240V, and 277V) � Driver is dimmable at 120V operation when connected to a compatible dimmer. � Driver is a high efficiency, electronic power supply providing DC power to the LED. � Driver meets FCC EMI/RFI Consumer Level limits on 120V main inputs, and is compliant for use in residential and commercial installations. � Driver features high power factor, low THD, and has integral thermal protection in the event of over temperature or internal failure. � Driver is replaceable, if replacement should be required. Dimming Designed for dimming capability to nominal 5% in normal operation with standard 120V Leading Edge (LE) and Trailing Edge (TE) phase control dimmers. (Consult dimmer manufacturer for dimmer compatibility and details. Note, some dimmers require a neutral in the wallbox.) Warranty Eaton provides a (5) five year limited warranty on the Halo ML56 LED Module. LED Module in New or Retrofit Existing Construction � Housings other than Halo � If used in recessed housings other than Halo the Eaton 5-year limited warranty applies to the LED Module and Trim only. � As with any electrical installation, a qualified electrician must ensure compatibility of use with a particular housing; this includes all applicable national and local electrical and building codes. Installer is responsible to properly and securely retain the LED Module and LED Trim in the housing at time of installation. Compliance � cULus listed 1598 Luminaire (Halo housings) � UL Classified when used in retrofit (refer to housing section) � cULus listed for damp locations � cULus Wet location listed with baffle and reflector trims only � Airtight certified per ASTM E283 (not exceeding 2.0 CFM under 57 Pascals pressure difference) � IP66 ingress protection rated with baffle and reflector trims only � RoHS compliant � May be used in IC (insulated ceiling) housings in direct contact with insulation* and combustible material � Can be used for California Title 24 compliance / Title 20 certified � Can be used for International Energy Conservation Code (IECC) high efficiency luminaire compliance. � Can be used for Washington State Energy Code compliance � ENERGY STAR� certified luminaire - consult ENERGY STAR� Certified product list � EMI/RFI per FCC 47CFR Part 15 Class B Consumer limits (commercial and residential compliant) � Photometric testing in accordance with IES LM-79 � Lumen maintenance projections in accordance with IES LM-80 and TM-21 � CE Mark - �Conformit� Europ�ene� conformity with the Council of European Communities Directives, meeting internationally recognized compliance when used with Halo H550, H750, and H2750 Series LED housings only Not for use with housings in direct contact with spray foam insulation. Refer to ENERGY STAR� Certified Products List. Can be used to comply with California Title 24 High Efficacy requirements. Certified to California Title 20 Appliance Efficiency Database.
