5"/6" LED Retrofit Baffle-Trim Kit,35K,1200Lum,90 CRI

HALO RL560WH12935 5"/6" LED Retrofit Baffle-Trim Kit,35K,1200Lum,90 CRI
Description
The Halo RL560 is a complete LED Baffle-Trim Module for 5" and 6" aperture recessed downlights; suitable for new construction, remodel and retrofit installation. The RL560 is cULus Listed for use with Halo and All-Pro, and is UL Classified for use with other compatible 5" and 6" housings. The RL560 with integral LED driver offers 120 volt dimming capability. The RL560 lens provides uniform illumination and wet location listing. Precision construction makes any housing AIR-TITE for added HVAC savings and code compliance. Compliant with NFPA 70, NEC section 410.16 (A)(1) and 410.16 (C)(3).
Specification Features
MECHANICAL
Module - Trim
� Module construction includes LED, heat sink, reflector, lens, baffle and trim ring
� Regressed baffle
� Heat sink designed to conduct heat away from the LED keeping the junction temperatures below specified maximums, even when installed in insulated ceiling environments. L70 at 50,000 hours
� Designer trim finish options
(sold separately)
� White (Paintable) Trim Ring
� Satin Nickel Trim Ring
� Tuscan Bronze Trim Ring
Lens
� Regressed lens
� Impact-resistant polycarbonate
� Convex form for lamp-like appearance
� Diffusing for even illumination
Mounting
� Integral torsion springs and Push- N-Twist clips offer two mounting options
� Torsion springs are pre-installed and adjust to fit 5" or 6" compatible housings
� Two piece universal installation friction blades provided are designed to fit 5" or 6" compatible housings
Housing Compatibility
See Housing Compatibility
LED
� Color Temperature (CCT)� Options: 2700K, 3000K, 3500K, 4000K, and 5000K
� 90 CRI can be used for California Title 24 compliance/certified to Title 20
LED Chromaticity
� A tight chromaticity specification ensures LED color uniformity, sustainable Color Rendering Index (CRI) and Correlated Color Temperature (CCT) over the useful life of the LED
� LED chromaticity of 3 SDCM exceeds ENERGY STAR� color standards per ANSI C78.377- 2008
� 90 CRI model features high color performance with R9 greater than 50 � Halo LED serialized testing and measurement ensures color and lumen consistency on a per-unit basis, and validates long-term product consistency over time
ELECTRICAL
Power Connections
� LED connector is a non-screw base luminaire disconnect offering easy installation with the matching Halo 5" and 6" LED housings
� LED Connector meets California Title-24 high efficacy luminaire requirement for a non-screw base socket, and where required to qualify as a high efficacy luminaire
� The included E26 medium screw-base Edison adapter provides easy retrofit of incandescent housings (see Housing Compatibility)
Ground Connection
Separate grounding cable included on the module for attachment to the housing during installation.
LED Driver
� With the latest "driver-on-board" electronic technology, the driver is integrated in the module.
� 120V 50/60 Hz constant current dimmable driver provides highefficiency operation
� Driver meets FCC 47CFR Part 15 EMI/RFI consumer limits for use in residential and commercial installations
� Driver features high power factor and low THD and has integral thermal protection in the event of over temperature or internal failure
� If dimming is not required the fixture can be operated from a standard wall switch
Dimming
� Designed for continuous dimming capability to nominally 5% with many 120V Leading Edge (LE) and Trailing Edge (TE) Phase Control dimmers. (Dimmers with low end trim adjustment offer greater assurance of achieving 5% level.)
� Consult dimmer manufacturer for compatibility and conditions of use
Note: some dimmers require a neutral in the wallbox.
Warranty
Eaton provides a five year limited warranty on RL56 LED.
Compliance
Labels
� UL Certified 1598 Luminaire with Halo housings and others - see Housing Compatibility
� UL Certified for Damp Location
� IP56 Ingress Protection rated
� May be installed in housings in direct contact with insulation** and combustible material
Compliance
� Airtight certified per ASTM E283
(not exceeding 2.0 CFM under 75
Pascals pressure difference)
� Can be used for International Energy Conservation Code
(IECC) high efficiency luminaire compliance.
� Suitable for use in closets.
Compliant with NFPA 70, NEC Sec.
410.16 (A)(1) and 410.16 (C)(3).
� Can be used for Washington State Energy Code compliance
� ENERGY STAR� Certified luminaire - consult ENERGY STAR� Certified
Product List*
� EMI/RFI per FCC 47CFR Part 15 Class B Consumer limits, suitable for use in residential and commercial installations
� Contains no mercury or lead and RoHS compliant.
� Photometric testing in accordance with IES LM-79
� Lumen maintenance projections in accordance with IES LM-80 and TM-21