HALO RL560WH9950 5"/6" LED Retrofit Baffle-Trim Kit,5000K,900Lum,90 CRI
Description
The Halo RL560 is a complete LED Baffle-Trim Module for 5" and 6" aperture
recessed downlights; suitable for new construction, remodel and retrofit
installation. The RL560 is cULus Listed for use with Halo and All-Pro, and is
UL Classified for use with other compatible 5" and 6" housings. The RL560
with integral LED driver offers 120 volt dimming capability. The RL560 lens
provides uniform illumination and wet location listing. Precision construction
makes any housing AIR-TITE for added HVAC savings and code compliance.
Compliant with NFPA 70, NEC section 410.16 (A)(1) and 410.16 (C)(3).
Specification Features
MECHANICAL
Module - Trim
� Module construction includes LED,
heat sink, reflector, lens, baffle and
trim ring
� Regressed baffle
� Heat sink designed to conduct
heat away from the LED keeping
the junction temperatures below
specified maximums, even when
installed in insulated ceiling
environments. L70 at 50,000 hours.
� Designer trim finish options
(sold separately)
� White (Paintable) Trim Ring
� Satin Nickel Trim Ring
� Tuscan Bronze Trim Ring
Lens
� Regressed lens
� Impact-resistant polycarbonate
� Convex form for lamp-like
appearance
� High lumen transmission
� Diffusing for even illumination
Mounting
� Integral torsion springs and Push-
N-Twist clips offer two mounting
options
� Torsion springs are pre-installed
and adjust to fit 5" or 6"
compatible housings
� Push-N-Twist universal installation
clips are pre-installed and
designed to fit 5" or 6" compatible
housings
Housing Compatibility
See Housing Compatibility
LED
� Color Temperature (CCT)� Options:
� 90 CRI: 2700K, 3000K, 3500K,
4000K, and 5000K
� Can be used to comply with
California Title 24 High Efficacy
requirements. Certified to California
Appliance Efficiency Database under
JA8.
LED Chromaticity
� A tight chromaticity specification
ensures LED color uniformity,
sustainable Color Rendering
Index (CRI) and Correlated Color
Temperature (CCT) over the useful
life of the LED
� LED chromaticity of 3 SDCM
exceeds ENERGY STAR� color standards
per ANSI C78.377-2008
� High color performance with R9
greater than 50
� Every Halo LED is quality tested,
measured, and serialized in a
permanent record to register
lumens, wattage, CRI and CCT
� Halo LED serialized testing and
measurement ensures color and
lumen consistency on a per-unit
basis, and validates long-term
product consistency over time
ELECTRICAL
Power Connections
� LED connector is a non-screw base
luminaire disconnect offering easy
installation with the matching Halo
5" and 6" LED housings
� LED Connector meets California
Title-24 high efficacy luminaire
requirement for a non-screw base
socket, and where required to
qualify as a high efficacy luminaire
� The included E26 medium screwbase
Edison adapter provides easy
retrofit of incandescent housings
(see Housing Compatibility)
Ground Connection
Separate grounding cable included
on the module for attachment to the
housing during installation.
LED Driver
� Dimmable driver is a 120 Volt, high
efficiency, electronic power supply
providing DC power to the LED
� Driver meets FCC EMI/RFI
Consumer Level limits for use
in residential and commercial
installations
� Driver features high power factor,
low THD, and has integral thermal
protection in the event of over
temperature or internal failure
Dimming
� Designed for continuous dimming
capability to nominally 5% with
many 120V Leading Edge (LE) and
Trailing Edge (TE) Phase Control
dimmers. (Dimmers with low
end trim adjustment offer greater
assurance of achieving 5% level.)
� Consult dimmer manufacturer for
compatibility and conditions of use
Note: some dimmers require a
neutral in the wallbox.
Warranty
Eaton provides a five year limited
warranty on RL56 LED.
Compliance
Labels
� UL Certified 1598 Luminaire with
Halo housings and others - see
Housing Compatibility
� UL Certified for Damp Location
� IP56 Ingress Protection rated
� May be installed in housings in
direct contact with insulation** and
combustible material
Compliance
� Airtight certified per ASTM E283
(not exceeding 2.0 CFM under 75
Pascals pressure difference)
� 90 CRI: Can be used to comply
with California Title 24 High Efficacy
requirements. Certified to California
Title 20 Appliance Efficiency
Database.*
� 80 CRI: Can be used to comply with
California Title 24 Non-Residential
Lighting Controls requirements as
an LED luminaire
� Can be used for International Energy
Conservation Code (IECC) high
efficiency luminaire compliance
� Can be used for Washington State
Energy Code compliance
� ENERGY STAR� Certified luminaire
- consult ENERGY STAR�
Certified
Product List*
� EMI/RFI per FCC 47CFR Part 15
Class B Consumer limits, suitable
for use in residential and commercial
installations
� Contains no mercury or lead and
RoHS compliant
� Photometric testing in accordance
with IES LM-79
� Lumen maintenance projections
in accordance with IES LM-80 and
TM-21
� Suitable for use in closets.
Compliant with NFPA 70, NEC Sec.
410.16 (A)(1) and 410.16 (C)(3).