SPECIFICATION FEATURES
DESCRIPTION
The
Halo Surface LED Downlight (SLD) incorporates WaveStream� technology to
create an ultra-low profile surface mounting luminaire with the
performance and look of a traditional downlight. SLD6 is designed for
installation in many 3-1/2� and 4� square, octagon or round junction
boxes. Suitable for residential or commercial installations. Ideal for
closets, storage areas, attics and basements. Compliant with NFPA� 70,
NEC � Section 410.16 (A)(3) and 410.16 (C)(5).
CONSTRUCTION
�
Die cast aluminum trim ring, and die formed aluminum frame
OPTICS
�WaveStream� technology provides uniform luminance from a low profile
flat lens
� AccuAim� optics provide directional control for the �cone-of-light�
beam distributionof a traditional downlight
� Precision
molded lens features high transmission polymer with UV stabilized
protecting film
DESIGNER
TRIMS
Accessories
(sold separately) SLD designer trims are accessory rings that attach to
the SLD for a permanent finish.
� White (Paintable)
�
Satin Nickel
� Tuscan Bronze
ELECTRICAL JUNCTION BOX
MOUNTING
�
SLD may be used in compatible electrical junction boxes in direct
contact with insulation including spray foam insulation
�
Suitable for installation in many 3-1/2� and 4� square, octagon, and
round electrical junction boxes
Note:
Driver consumes 3 cubic inches of junction box
� Surface mounting in a fire-rated ceiling using an appropriate
electrical box offers a cost-effective alternative to fire-rated
recessed housings
Note:
Fire-rating is per the rating of the ceiling and applicable junction
box, not the SLD.
�
Installer must ensure compatibility of fit, wiring and proper mounting
in the electrical junction box. This includes all applicable national
and local electrical and building codes
�
Proprietary Slot-N-Lock quick installation system for junction box
installation
�
T-bracket with Slot-N-Lock mounting tabs included LED
�
Trilateral linear LED assembly is integrated in trim perimeter
�
Color Temperature: 2700K(comes with), 3000K, 3500K, 4000K
�
CRI options: 80 and 90
- 90 CRI can be used for California Title 24 compliance/registered to
Title 20
- 80 CRI can be used to comply with California Title 24 Non-Residential
Lighting Controls requirements as a LED
luminaire.
�
L70 at 50,000 hours projected in accordance with TM-21
WARRANTY
Cooper
Lighting provides a five year limited warranty on the SLD LED LED
CHROMATICITY
�
A tight chromaticity specification ensures LED color uniformity,
sustainable Color Rendering Index (CRI) and Correlated
Color
Temperature (CCT) over the useful life of the LED
� LED chromaticity of 3 SDCM exceeds ENERGY STAR� color standards per
ANSI
�
90 CRI model features high color performance with R9 greater than 50
� Every
Halo LED is quality tested, measured, and serialized in a permanent
record to register lumens,wattage, CRI and CCT.
�
Halo LED serialized testing and measurement ensures color and lumen
consistency on a per-unit basis, and validates long-term product
consistency
over
time
ELECTRICAL
CONNECTIONS
JUNCTION BOX
� Compatible with 3-1/2� x 2� and 4� x 1 -1/2� deep round, square and
octagon boxes (2-1/8� deep boxes recommended)
�
Supply Wire Adapter with LED quick connector included LED DRIVER
�
Driver is a 120V input, high efficiency, dimmable electronic power
supply providing DC power to the LED array
�
Driver features high power factor, low THD, and has integral thermal
protection in the event of over temperature or internal failure
�
Driver is replaceable if it should be required
DIMMING
�
Designed for continuous dimming capability to nominally 5% with many
120V Leading Edge (LE) and Trailing Edge (TE) phase control dimmers.
Dimming
to 5% is best assured using dimmers with low end trim adjustment.
Consult dimmer manufacturer for compatibility and conditions of use.
(Note some dimmers require a neutral in the wallbox.)
COMPLIANCE
�
cULus Listed ceiling and wall
� cULus Damp Location listed ceiling and wall
�
cULus Wet Location Listed, ceiling only (shower rated)
Suitable
for use in closets, compliant with NFP A� 70, NEC� Section 410.16
(A)(3) and 410.16(C)(5)
� SLD may be used in compatible electrical junction boxes in direct
contact with insulation including spray foam insulation
�
EMI/RFI: meets FCC 47CFR Part 15 Class B limits, and is suitable for
use in residential and commercial
installations
�
Air tight certified per ASTM E283 (not exceeding 2.0 CFM under 57
Pascals pressure difference)
� 90 CRI: Can be used to comply with California Title 24 High Efficacy
requirements. Certified to California Title 20 Appliance
Efficiency
Database.
�
80 CRI: Can be used to comply with California Title 24 Non-Residential
Lighting Controls requirements as a LED luminaire.
�
Can be used for International Energy Conservation Code (IECC) and
Washington State Energy Code high efficiency luminaire
compliance
� ENERGY STAR� certifiedluminaire - consult ENERGY STAR� Certified
Product List
� Contains no mercury or lead and RoHS compliant.
�
Photometric testing in accordance with IES LM-79
� Lumen maintenance projections in accordance with IES LM-80 and TM-21