HALO ML5612927 (27/30/35/40) 5"&6" LED MODULE 1200 Lumens 90 CRI
Description
The ML56 LED downlight system is a flexible solution for your recessed lighting needs. High
color fidelity 90 CRI modules are available in three lumen outputs and four color temperatures
and because they are compatible with Halo LED housing and many other existing screw
based housings, the ML56 LED system can be used in remodel, retrofit and new construction
installations. An optional dim-to-warm (D2W�) feature creates an additional lighting solution
as it provides a smooth warm transition from 3000K to 1850K when dimmed.
Specification Features
Mechanical
Light Module
� Module includes LED package, LED driver,
heat sink, and lens
� Durable die-cast aluminum construction.
� Heat sink designed to conduct heat
away from the LED keeping the junction
temperatures below specified maximums,
including insulated ceiling environments
Optics
� Diffuse lens is standard on all 1200 Series
LED light modules
� Impact-resistant polycarbonate
� Convex form for lamp-like appearance
� High lumen transmission
� Optional beam forming optic replaces
diffuse lens and provide narrow flood (NFL)
25� nominal distribution. Beam forming
optic is field installed. Order separately
(accessories).
Mounting
� Modules attach to reflector and baffle trims
via locking tabs, and attach to eyeballs via
keyed twist-to-lock mating bosses
� The complete light module and trim
assembly installs into housings with
precision formed torsion springs located
on the trim
� Use retrofit adapter band (ML7RAB)
accessory when housing does not have
receivers for torsion springs.
Housing Compatibility
A complete ML56 system includes a LED
Module, LED trim, and a compatible housing
(new construction, remodel, or existing
retrofit). Housing compatibility in the ML56
System is determined by the ML56 trim
dimensions. ML56 trims are available in 5�
and 6� aperture (5� = 59xx series and 6� =
69xx series trims). Refer to Housing � Trim
Section in this document.
LED
� 1200 Series = 1200 design lumens typical.
Delivered lumens vary upon 5" or 6" trim,
color temperature, and trim finish.
� Color Temperature options: 2700K, 3000K,
3500K, 4000K
� Dim-to-warm (D2W) Option:
3000K, shifts to 1850K as it dims CRI>90
throughout dimming range
� CRI: 90, R9>50
� L70 at 50,000 hours, projected in
accordance with IES TM-21
Color Specification & Quality Standards
� A tight chromaticity specification ensures
LED color uniformity, sustainable Color
Rendering Index (CRI) and Correlated Color
Temperature (CCT) over the useful life of
the LED
� LED color uniformity of 3 SDCM exceeds
ENERGY STAR� color standards per ANSI
C78.377- 2008.
� High color performance which maintains
90CRI and R9>50 throughout dimming
range.
� Every Halo LED Module is quality tested
and performance measured, and then
serialized in a permanent record to register
lumens, wattage, CRI and CCT.
� Halo LED serialized testing and
measurement process ensures color and
lumen consistency on a per-unit basis, and
validates long-term product consistency
over time
� ML56 LED Modules include lumen, CRI,
and CCT in the model number
� Example: ML5612930
56 = 5� / 6� aperture series
12 = 1200 lumen series
9 = >90 CRI
30 = 3000K nominal
Electrical Power Connections
� LED connector is a non-screw base
luminaire disconnect offering easy
installation in Halo 5� H550 Series and 6�
H750 and H2750 Series housings (per LED
trim 5� or 6�).
� LED Connector meets high-efficacy
luminaire requirements as a non-screw
base, and where required.
� The included E26 medium screw-base
Edison adapter provides easy retrofit of
incandescent housings
(see Housing Section).
Ground Connection
� Separate grounding cable included on
the module for attachment to the housing
during installation.
LED Driver
� Driver is universal voltage 120V-277V, and
may be controlled from a switch in Halo
LED housings at 120V, 220V, 230V, 240V,
and 277V.
� Driver is dimmable at 120V operation when
connected to a compatible dimmer.
� Driver is a high efficiency, electronic power
supply providing DC power to the LED.
� Driver meets FCC EMI/RFI Consumer
Level limits on 120V main inputs, and
is compliant for use in residential and
commercial installations.
� Driver features high power factor, low
THD, and has integral thermal protection in
the event of over temperature or internal
failure.
� Driver is replaceable, if replacement should
be required.
Dimming
Designed for dimming capability to nominal
5% in normal operation with standard 120V
Leading Edge (LE) and Trailing Edge (TE)
phase control dimmers. (Consult dimmer
manufacturer for dimmer compatibility and
details. Note, some dimmers require a neutral
in the wallbox.)
Warranty
Eaton provides a (5) five year limited warranty
on the Halo ML56 LED Module.
LED Module in New or Retrofit Existing
Construction � Housings other than Halo
� If used in recessed housings other than
Halo the Eaton 5-year limited warranty
applies to the LED Light Module and Trim
only.
� As with any electrical installation,a
qualified electrician must ensure
compatibility of use with a particular
housing; this includes all applicable
national and local electrical and building
codes. Installer is responsible to properly
and securely retain the LED Module
and LED Trim in the housing at time of
installation.
Compliance
� cULus listed 1598 Luminaire (Halo housings
� UL Classified when used in retrofit (refer to housing section)
� cULus listed for damp locations
� cULus Wet location listed with baffle and reflector trims
only
� Airtight certified per ASTM E283 (not exceeding 2.0 CFM
under 57 Pascals pressure difference)
� IP56 ingress protection rated with baffle and reflector trims
only
� RoHS compliant
� May be used in IC (insulated ceiling) housings in direct
contact with insulation* and combustible material
� Can be used for California Title 24 compliance / Title 20
certified
� Can be used for International Energy Conservation Code
(IECC) high efficiency luminaire compliance.
� Can be used for Washington State Energy Code compliance
� ENERGY STAR� certified luminaire - consult ENERGY
STAR� certified product list
� EMI/RFI per FCC 47CFR Part 15 Class B Consumer limits
(commercial and residential compliant)
� Photometric testing in accordance with IES LM-79
� Lumen maintenance projections in accordance with IES
LM-80 and TM-21
� CE Mark - �Conformit� Europ�ene� conformity with the
Council of European Communities Directives, meeting
internationally recognized compliance when used with Halo
H550, H750, and H2750 Series LED housings only
* Not for use with housings in direct
contact with spray foam insulation.
Refer to ENERGY STAR� Certified Products List.
Can be used to comply with California Title 24 High Efficacy requirements.
Certified to California Title 20 Appliance Efficiency Database.
ml5612940