Juno IC20RLEDG3 5" IC Remodel LED Downlight, 600 lumens, Generation 3 technology. Dedicated 120V driver or Universal 120V- 277V driver.
Dedicated LED, Air-Locï¿½ remodel housing with integral light engine
ï¿½ Shallow housing allows for fit in 2 x 6 construction ï¿½ IC remodel housing
for remodel application where back side of ceiling is not accessible
ï¿½ Installs through an opening in the ceiling from below ï¿½ Secured in place
by factory installed remodel springs ï¿½ Can be completely covered with
insulation ï¿½ When used with supplied ALG kit, stops infiltration and
exfiltration of air, reducing heating and air cooling costs ï¿½ LED housing
is designed to provide 50,000 hours of life and is compatible with many
standard Juno trims ï¿½ 5 year limited warranty on LED components.
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT
ï¿½ No harmful ultraviolet or infrared wavelengths
ï¿½ No lead or mercury
ï¿½ Comparable light output to 65W BR30
incandescent while consuming less than 11W*
LED Light Engine LED array integrated to one piece high purity aluminum,
thermally conductive housing provides uninterrupted heat transfer to ensure
long life of the LED ï¿½ Replaceable light engine mounts directly to housing
and incorporates the latest generation, high lumen output LED array ï¿½ LEDs
are binned to standards that exceed ENERGY STARï¿½ requirements yielding
superior fixture to fixture color uniformity ï¿½ 2700K, 3000K, 3500K, or
4100K color temperatures available ï¿½ 83 CRI typical.
Optical System Computer-optimized reflector design with high reflectance
white finish coupled with a high transmission diffusing lens conceals the
LEDs and produces uniform aperture luminance ï¿½ Deep regression of lens
produces a low glare, efficient system that can produce over 600 lumens
with select trims (see page 2 for details) using less than 11W* ï¿½ Wide
flood distribution shipped as standard with optional optic accessories
available and sold separately.
Aesthetic Trim Selections Compatible with wide selection of existing
Juno trims ï¿½ Shadow free, knife edge design blends seamlessly into ceiling.
LED Driver Choice of dedicated 120 volt driver or universal voltage driver
that accommodates input voltages from 120-277 volts AC at 50/60Hz
ï¿½ Power factor > 0.9 at 120V input ï¿½ 120 volt only driver is dimmable
with the use of most incandescent, magnetic low voltage and electronic low
voltage wall box dimmers ï¿½ Universal voltage driver is dimmable with the
use of most 0-10V wall box dimmers ï¿½ For a list of compatible dimmers,
see JUNOLEDG3-6-DIM ï¿½ Mounted between the j-box and housing for easy
access and cool operation.
Life Rated for 50,000 hours at 70% lumen maintenance.
Labels ENERGY STARï¿½ qualified to luminaires V1.1 requirements when
used with select baffle and cone trims ï¿½ Certified to the high efficiency
requirements of California T24-2008 with select trims ï¿½ UL listed for U.S.
and Canada through-branch wiring, damp locations ï¿½ Union made
ï¿½ UL and cUL.
Testing All reports are based on published industry procedures; field
performance may differ from laboratory performance.
Product specifications subject to change without notice.
Housing Designed for use in IC (insulated ceiling) or non-IC construction
ï¿½ Aluminum housing sealed for Air-Locï¿½ compliance when used with ALG kit
ï¿½ Remodel springs accommodate up to
11⁄8ï¿½ ceiling thickness.
Junction Box Pre-wired junction box provided with (5) 1⁄2ï¿½ knockouts,
(4) knockouts for 12/2 or 14/2 NM cable and ground wire
ï¿½ Knockouts equipped with pryout slots ï¿½ Quick connect electrical
connectors supplied as standard for fast, secure installatio
* Nominal input wattage @ 120-volt operation with dedicated 120V driver under stable operating conditions.