Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
6" IC Remodel LED Downlight, 600 lumens,Generation 3 technology. Dedicated?120V driver or Universal 120V- 277V driver.
Juno IC22RLEDG3 6" IC Remodel LED Downlight, 600 lumens,Generation 3 technology. Dedicated?120V driver or Universal 120V- 277V driver.
PRODUCT DESCRIPTION
Dedicated LED, Air-Loc� remodel housing with integral light engine � Shallow housing allows for fit in 2 x 6 construction � IC remodel housing for remodel application where back side of ceiling is not accessible � Installs through an opening in the ceiling from below � Secured in place by factory installed remodel springs � Can be completely covered with insulation � When used with supplied ALG kit, stops infiltration and exfiltration of air, reducing heating and air cooling costs � LED housing is designed to provide 50,000 hours of life and is compatible with many standard Juno trims � 5 year limited warranty on LED components.
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT
� No harmful ultraviolet or infrared wavelengths � No lead or mercury � Comparable light output to 65W BR30 incandescent while consuming less than 11W*
PRODUCT SPECIFICATIONS
LED Light Engine LED array integrated to one piece high purity aluminum, thermally conductive housing provides uninterrupted heat transfer to ensure long life of the LED � Replaceable light engine mounts directly to housing and incorporates the latest generation, high lumen output LED array � LEDs are binned to standards that exceed ENERGY STAR� requirements yielding superior fixture to fixture color uniformity � 2700K, 3000K, 3500K, or 4100K color temperatures available � 83 CRI typical.
Optical System Computer-optimized reflector design with high reflectance white finish coupled with a high transmission diffusing lens conceals the LEDs and produces uniform aperture luminance � Wide flood distribution shipped as standard with optional optic accessories available and sold separately.
Aesthetic Trim Selections Compatible with wide selection of existing Juno trims � Shadow free, knife edge design blends seamlessly into ceiling. � Trims are wet location approved for covered ceiling applications.
LED Driver Choice of dedicated 120 volt driver or universal voltage driver that accommodates input voltages from 120-277 volts AC at 50/60Hz � Power factor > 0.9 at 120V input � 120 volt only driver is dimmable with the use of most incandescent, magnetic low voltage and electronic low voltage wall box dimmers � Universal voltage driver is dimmable with the use of most 0-10V wall box dimmers � For a list of compatible dimmers, see JUNOLEDG3-6-DIM � Mounted between the j-box and housing for easy access and cool operation.
Life Rated for 50,000 hours at 70% lumen maintenance.
Labels Certified to the high efficiency requirements of California T24-2008 with select trims � UL listed for U.S. and Canada wet locations (covered ceilings) � Union made � UL and cUL.
Testing All reports are based on published industry procedures; field performance may differ from laboratory performance. Product specifications subject to change without notice.
HOUSING FEATURES
Housing Designed for use in IC (insulated ceiling) or non-IC construction � Aluminum housing sealed for Air-Loc compliance when used with ALG kit � Remodel springs accommodate up to 17⁄8� ceiling thickness.
Junction Box Pre-wired junction box provided with (5) 1⁄2� knockouts, (4) knockouts for 12/2 or 14/2 NM cable and ground wire � Knockouts equipped with pryout slots � Quick connect electrical connectors supplied as standard for fast, secure installation.
* Nominal input wattage @ 120-volt operation with dedicated 120-volt drive under stable operating conditions.
PRODUCT DESCRIPTION
Dedicated LED, Air-Loc� remodel housing with integral light engine � Shallow housing allows for fit in 2 x 6 construction � IC remodel housing for remodel application where back side of ceiling is not accessible � Installs through an opening in the ceiling from below � Secured in place by factory installed remodel springs � Can be completely covered with insulation � When used with supplied ALG kit, stops infiltration and exfiltration of air, reducing heating and air cooling costs � LED housing is designed to provide 50,000 hours of life and is compatible with many standard Juno trims � 5 year limited warranty on LED components.
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT
� No harmful ultraviolet or infrared wavelengths � No lead or mercury � Comparable light output to 65W BR30 incandescent while consuming less than 11W*
PRODUCT SPECIFICATIONS
LED Light Engine LED array integrated to one piece high purity aluminum, thermally conductive housing provides uninterrupted heat transfer to ensure long life of the LED � Replaceable light engine mounts directly to housing and incorporates the latest generation, high lumen output LED array � LEDs are binned to standards that exceed ENERGY STAR� requirements yielding superior fixture to fixture color uniformity � 2700K, 3000K, 3500K, or 4100K color temperatures available � 83 CRI typical.
Optical System Computer-optimized reflector design with high reflectance white finish coupled with a high transmission diffusing lens conceals the LEDs and produces uniform aperture luminance � Wide flood distribution shipped as standard with optional optic accessories available and sold separately.
Aesthetic Trim Selections Compatible with wide selection of existing Juno trims � Shadow free, knife edge design blends seamlessly into ceiling. � Trims are wet location approved for covered ceiling applications.
LED Driver Choice of dedicated 120 volt driver or universal voltage driver that accommodates input voltages from 120-277 volts AC at 50/60Hz � Power factor > 0.9 at 120V input � 120 volt only driver is dimmable with the use of most incandescent, magnetic low voltage and electronic low voltage wall box dimmers � Universal voltage driver is dimmable with the use of most 0-10V wall box dimmers � For a list of compatible dimmers, see JUNOLEDG3-6-DIM � Mounted between the j-box and housing for easy access and cool operation.
Life Rated for 50,000 hours at 70% lumen maintenance.
Labels Certified to the high efficiency requirements of California T24-2008 with select trims � UL listed for U.S. and Canada wet locations (covered ceilings) � Union made � UL and cUL.
Testing All reports are based on published industry procedures; field performance may differ from laboratory performance. Product specifications subject to change without notice.
HOUSING FEATURES
Housing Designed for use in IC (insulated ceiling) or non-IC construction � Aluminum housing sealed for Air-Loc compliance when used with ALG kit � Remodel springs accommodate up to 17⁄8� ceiling thickness.
Junction Box Pre-wired junction box provided with (5) 1⁄2� knockouts, (4) knockouts for 12/2 or 14/2 NM cable and ground wire � Knockouts equipped with pryout slots � Quick connect electrical connectors supplied as standard for fast, secure installation.
* Nominal input wattage @ 120-volt operation with dedicated 120-volt drive under stable operating conditions.
