Juno IC926LED9G3 6" Standard Slope Ceiling Generation 3 LED, 900 Lumen New Construction Housing. Dedicated?120V driver or Universal 120V- 277V driver.
PRODUCT DESCRIPTION
Dedicated LED, Air-Loc� sealed slope ceiling new construction housing with integral light engine � IC rated construction housing can be completely covered with insulation � Fully sealed housing stops infiltration and exfiltration of air, reducing heating and air cooling costs without the use of additional gaskets � LED housing is designed to provide 50,000 hours of life and is compatible with standard Juno trims � 5 year limited warranty on LED components.
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT
� No harmful ultraviolet or infrared wavelengths
� No lead or mercury
� Comparable light output to 26W compact
fluorescent while consuming less than 16W*
PRODUCT SPECIFICATIONS
LED Light Engine Extruded heat sink and cast aluminum slider plate integrated directly with housing provides superior thermal management to ensure the long life of the LED � Replaceable light engine mounts directly to slider plate and incorporates the latest generation, high lumen output LED array � LEDs are binned to standards that exceed ENERGY STAR� requirements yielding superior fixture to fixture color uniformity � 2700K, 3000K, 3500K, or 4100K color temperatures available � 80 minimum CRI typical.
Optical System Computer-optimized internal reflector with specular finish coupled with a high transmission diffusing lens conceals the LEDs and produces uniform aperture luminance
� Adjustable slider plate to position LEDs/reflector perpendicular
to floor � Plate includes 1/4� adjustment indicators for consistent alignment.
Aesthetic Trim Selections Compatible with a selection
of existing Juno trims � Trims are wet location approved for covered ceiling applications.
LED Driver Choice of dedicated 120 volt driver or universal voltage driver that accommodates input voltages from 120-277 volts AC at 50-60Hz � Power factor > 0.9 at 120V input
� 120 volt only driver dimmable with the use of most incandescent, magnetic low voltage and electronic low voltage wall box dimmers � Universal voltage driver is dimmable with the use of most 0-10V wall dimmers � For a list of compatible dimmers, see JUNOLEDG3-DIM � Mounted inside housing on
a removable J-box cover for ease of maintenance.
Life Rated for 50,000 hours at 70% lumen maintenance.
Labels UL listed for U.S. and Canada through-branch wiring, wet locations (covered ceilings) � Union made � UL and cUL listed.
Testing All reports are based on published industry procedures; field performance may differ from laboratory performance.
Product specifications subject to change without notice.
HOUSING FEATURES
Housing Designed for use in IC (insulated ceiling) or non-IC construction � .032� aluminum housing sealed for Air-Loc compliance � Access door for junction box accessibility
� Inner skirt is vertically adjustable to accommodate up
to a 1� ceiling thickness.
Junction Box Pre-wired junction box provided with (5) 1⁄2� and
(1) 3⁄4� knockouts, (4) non-metallic sheathed cable connectors and ground wire, UL and cUL listed for through-branch wiring, maximum 8 No. 12 AWG 90˚ C branch circuit conductors
(4 in, 4 out) � Junction box provided with removable access plates � Knockouts equipped with pryout slots � Push-in electrical connectors supplied as standard for fast, secure installation.
Mounting Frame 22-gauge die-formed galvanized steel mounting frame � Rough-in section (junction box, mounting frame, housing and bar hangers) fully assembled for ease of installation.
Real Nail� 3 Bar Hangers Telescoping Real Nail� 3 system permits quick placement of housing anywhere within 24� O.C. joists or suspended ceilings � Includes removable nail for repositioning of fixture in wood joist construction � Integral T-bar mounting feature for suspended ceilings � Design covered under patents US5,505,419 and D552,969.
* Nominal input wattage @ 120 volt operation with dedicated 120 volt driver under stable operating conditions.