Juno IC928LED9G3 6" Super Slope Ceiling Generation 3 LED, 900 Lumen New Construction Housing. Dedicated?120V driver or Universal 120V- 277V driver.
PRODUCT DESCRIPTION
Dedicated LED, Air-Loc� sealed slope ceiling new construction
housing with integral light engine � IC rated construction housing
can be completly covered with insulation � Fully sealed housing
stops infiltration and exfiltration of air, reducing heating and air
cooling costs without the use of additional gaskets � LED housing
is designed to provide 50,000 hours of life and is compatible with
standard Juno trims � 5 year limited warranty on LED components.
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT
� No harmful ultraviolet or infrared wavelengths
� No lead or mercury
� Comparable light output to 26W compact
fluorescent while consuming less than 16W*
PRODUCT SPECIFICATIONS
LED Light Engine Extruded heat sink and cast aluminum slider
plate integrated directly with housing provides superior thermal
management to ensure the long life of the LED � Replaceable
light engine mounts directly to slider plate and incorporates the
latest generation, high lumen output LED array � LEDs are binned
to standards that exceed ENERGY STAR� requirements yielding
superior fixture to fixture color uniformity � 2700K, 3000K,
3500K, or 4100K color temperatures available � 80 minimum
CRI typical.
Optical System Computer-optimized internal reflector with
specular finish coupled with a high transmission diffusing lens
conceals the LEDs and produces uniform aperture luminance
� Adjustable slider plate to position LEDs/reflector perpendicular
to floor � Plate includes 1/4� adjustment indicators for consistent
alignment.
Aesthetic Trim Selections Compatible with a selection
of existing Juno trims � Trims are wet location approved for
covered ceiling applications.
LED Driver Choice of dedicated 120 volt driver or universal
voltage driver that accommodates input voltages from 120-277
volts AC at 50-60Hz � Power factor > 0.9 at 120V input
� 120 volt only driver dimmable with the use of most
incandescent, magnetic low voltage and electronic low voltage
wall box dimmers � Universal voltage driver is dimmable with
the use of most 0-10V wall dimmers � For a list of compatible
dimmers, see JUNOLEDG3-DIM � Mounted inside housing on
a removable J-box cover for ease of maintenance.
Life Rated for 50,000 hours at 70% lumen maintenance.
Labels UL listed for U.S. and Canada through-branch wiring, wet
locations (covered ceilings)� Union made � UL and cUL listed.
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Product specifications subject to change without notice.
HOUSING FEATURES
Housing Designed for use in IC (insulated ceiling) or non-
IC construction � .032� aluminum housing sealed for Air-Loc
compliance � Access door for junction box accessibility
� Insert skirt is vertically adjustable to accommodate up
to a
1� ceiling thickness.
Junction Box Pre-wired junction box provided with (5) 1⁄2� and
(1) 3⁄4� knockouts, (4) non-metallic sheathed cable connectors
and ground wire, UL and cUL listed for through-branch wiring,
maximum 8 No. 12 AWG 90� C branch circuit conductors
(4 in, 4 out) � Junction box provided with removable access
plates � Knockouts equipped with pryout slots � Push-in electrical
connectors supplied as standard for fast, secure installation.
mounting frame � Rough-in section (junction box, mounting
frame, housing and bar hangers) fully assembled for ease of
installation.
Real Nail� 3 Bar Hangers Telescoping Real Nail� 3 system
permits quick placement of housing anywhere within 24�
O.C. joists or suspended ceilings � Includes removable nail for
repositioning of fixture in wood joist construction � Integral T-bar
mounting feature for suspended ceilings � Design covered under
patents US5,505,419 and D552,969.
* Nominal input wattage @ 120 volt operation with dedicated
120 volt driver under stable operating conditions.