Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
6" Incandescent Standard Slope Housing
 "Juno TC926 6\" Incandescent Standard Slope Housing")
Juno TC926 6" Incandescent Standard Slope Housing
Features
� 6" Standard slope housing (oval)
� Oblique angle housing design holds trims flush with the ceiling
� Adjustable socket plate permits lamp to remain perpendicular to floor through entire pitch range
� Medium base porcelain socket with nickel-plated copper screw shell
� Housing is vertically adjustable to accommodate up to a 1" ceiling thickness
� Real Nail� 3 bar hangers: telescoping system with pre-installed removable nail for easy repositioning of housing in joist construction � Integral T-bar mounting feature for secure installation in suspended ceilings � Patented break-away bars for tight joist spacing � Bar hangers may be repositioned 90� � Curved foot facilitates alignment with joist bottom � Quick-Loc slot and oversized set screw lock fixture in position
� Housing is fully assembled for ease of installation
� Pre-wired junction box with (5) 1/2" and (1) 3/4" knockouts with pryout slots, (4) non-metallic sheathed cable connectors, and ground wire
� Shadow-free, knife-edge trim design blends smoothly into the ceiling and allows architectural continuity with Aculux� trims
� Angle-cut baffles ensure grooves remain parallel to the floor to provide proper optics
� UL Listed, C-UL/CSA certified for through-branch wiring, maximum (8) #12 AWG branch circuit conductors (4 in, 4 out)
� Thermally protected against improper use of lamps
� Lamp wattage ratings and apertures based on trim selection
Description
Non-IC rated housing for use in 2/12 to 6/12 pitch slopes (9� to 27�) � Designed to be installed in non-insulated areas, or where insulation is spaced at least 3" from housing � Juno�s patented Slope Ceiling Down-Lites direct light straight down, providing proper lighting from a sloped surface
Listings
UL Listed, C-UL/CSA certified for through-branch wiring, damp and wet locations � Wet location listed with the 610 trim � Conforms with City of Chicago IP requirements
Ordering Information
Catalog Number: TC926
Features
� 6" Standard slope housing (oval)
� Oblique angle housing design holds trims flush with the ceiling
� Adjustable socket plate permits lamp to remain perpendicular to floor through entire pitch range
� Medium base porcelain socket with nickel-plated copper screw shell
� Housing is vertically adjustable to accommodate up to a 1" ceiling thickness
� Real Nail� 3 bar hangers: telescoping system with pre-installed removable nail for easy repositioning of housing in joist construction � Integral T-bar mounting feature for secure installation in suspended ceilings � Patented break-away bars for tight joist spacing � Bar hangers may be repositioned 90� � Curved foot facilitates alignment with joist bottom � Quick-Loc slot and oversized set screw lock fixture in position
� Housing is fully assembled for ease of installation
� Pre-wired junction box with (5) 1/2" and (1) 3/4" knockouts with pryout slots, (4) non-metallic sheathed cable connectors, and ground wire
� Shadow-free, knife-edge trim design blends smoothly into the ceiling and allows architectural continuity with Aculux� trims
� Angle-cut baffles ensure grooves remain parallel to the floor to provide proper optics
� UL Listed, C-UL/CSA certified for through-branch wiring, maximum (8) #12 AWG branch circuit conductors (4 in, 4 out)
� Thermally protected against improper use of lamps
� Lamp wattage ratings and apertures based on trim selection
Description
Non-IC rated housing for use in 2/12 to 6/12 pitch slopes (9� to 27�) � Designed to be installed in non-insulated areas, or where insulation is spaced at least 3" from housing � Juno�s patented Slope Ceiling Down-Lites direct light straight down, providing proper lighting from a sloped surface
Listings
UL Listed, C-UL/CSA certified for through-branch wiring, damp and wet locations � Wet location listed with the 610 trim � Conforms with City of Chicago IP requirements
Ordering Information
Catalog Number: TC926
