Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
12V LED-Compatible,1-Circuit Electronic Transformer 120 VAC. IC-Rated
Juno TL602E 12V LED-Compatible,1-Circuit Electronic Transformer 120 VAC. IC-Rated
PRODUCT SPECIFICATIONS
Description
TL602E-10: 12V-10VA Class 2 electronic Driver/Transformer � IC rated for recessed applications and can be buried in insulation � Rated for 0.5-10 watts total load � 120VAC input � Ideally suited for driving Juno Mini LED Downlight/Gimbal and Solo-Task fixtures � May also be used to operate other low wattage LED or incandescent loads.
TL602E-25: 12V-25VA Class 2 electronic Driver/Transformer � IC rated for recessed applications and can be buried in insulation � Rated for 0.5-25 watts total load � 120VAC input � Ideally suited for driving Juno Mini LED Downlight/Gimbal and Solo-Task fixtures � May also be used to operate other low wattage LED or incandescent loads.
TL602E-60: 12V-60VA Class 2 electronic Driver/Transformer � IC rated for recessed applications and can be buried in insulation � Rated for 0.5-60 watts total load � 120VAC input � Ideally suited for driving Juno Mini LED Downlight/Gimbal and Solo-Task fixtures � May also be used to operate other low wattage LED or incandescent loads.
Note: Other TL602E driver/transformer wattages up to 60W are available via special order � consult factory for pricing and availability.
Construction
18 gauge die formed steel housing � Low-profile, 1� overall height � Available in standard direct-wire and optional 6� 3-wire cord & plug version � Terminal block provided for direct wire inputs accepts 18-12 AWG � All versions provided with terminal block on output side for quick and secure fixture wiring (Type CL2 or NEC equivalent 18-12 AWG) � Direct-wire versions supplied with die-cast fitting for 3/8� flexible metal conduit � White polyester powder coat paint finish.
Dimming
May be dimmed using only dimmers that have been tested and qualified by Juno for use with Juno LED fixtures; reference the following pages for dimmer compatibility � Consult factory to confirm compatibility of other dimmers prior to installation with Juno LED fixtures.
Installation
Transformer should be located within 4' of first fixture in run � To avoid excessive voltage drop in light output, make sure the fixture voltage at the last fixture is at least 10 volts � Fully loaded run lengths longer than 18� with 12 AWG is not recommended due to voltage drop � Terminal block wiring connections for simpler, faster installation � Provision for ground wire attachment � Two 1/2� #6 wood screws provided for mounting to wood surfaces � IC rated for use in insulated or non-insulated applications.
Labels
cULus Listed for use in the U.S. (UL 2108) and Canada (CSA C22.2 No. 250.0) � Suitable for damp locations. Product specifications subject to change without notice.
PRODUCT CODES Catalog Number Finish Description
TL602E-10-WH White 10W 12V AC Electronic Driver/Transformer
TL602E-25-WH White 25W 12V AC Electronic Driver/Transformer
TL602E-60-WH White 60W 12V AC Electronic Driver/Transformer
PRODUCT SPECIFICATIONS
Description
TL602E-10: 12V-10VA Class 2 electronic Driver/Transformer � IC rated for recessed applications and can be buried in insulation � Rated for 0.5-10 watts total load � 120VAC input � Ideally suited for driving Juno Mini LED Downlight/Gimbal and Solo-Task fixtures � May also be used to operate other low wattage LED or incandescent loads.
TL602E-25: 12V-25VA Class 2 electronic Driver/Transformer � IC rated for recessed applications and can be buried in insulation � Rated for 0.5-25 watts total load � 120VAC input � Ideally suited for driving Juno Mini LED Downlight/Gimbal and Solo-Task fixtures � May also be used to operate other low wattage LED or incandescent loads.
TL602E-60: 12V-60VA Class 2 electronic Driver/Transformer � IC rated for recessed applications and can be buried in insulation � Rated for 0.5-60 watts total load � 120VAC input � Ideally suited for driving Juno Mini LED Downlight/Gimbal and Solo-Task fixtures � May also be used to operate other low wattage LED or incandescent loads.
Note: Other TL602E driver/transformer wattages up to 60W are available via special order � consult factory for pricing and availability.
Construction
18 gauge die formed steel housing � Low-profile, 1� overall height � Available in standard direct-wire and optional 6� 3-wire cord & plug version � Terminal block provided for direct wire inputs accepts 18-12 AWG � All versions provided with terminal block on output side for quick and secure fixture wiring (Type CL2 or NEC equivalent 18-12 AWG) � Direct-wire versions supplied with die-cast fitting for 3/8� flexible metal conduit � White polyester powder coat paint finish.
Dimming
May be dimmed using only dimmers that have been tested and qualified by Juno for use with Juno LED fixtures; reference the following pages for dimmer compatibility � Consult factory to confirm compatibility of other dimmers prior to installation with Juno LED fixtures.
Installation
Transformer should be located within 4' of first fixture in run � To avoid excessive voltage drop in light output, make sure the fixture voltage at the last fixture is at least 10 volts � Fully loaded run lengths longer than 18� with 12 AWG is not recommended due to voltage drop � Terminal block wiring connections for simpler, faster installation � Provision for ground wire attachment � Two 1/2� #6 wood screws provided for mounting to wood surfaces � IC rated for use in insulated or non-insulated applications.
Labels
cULus Listed for use in the U.S. (UL 2108) and Canada (CSA C22.2 No. 250.0) � Suitable for damp locations. Product specifications subject to change without notice.
PRODUCT CODES Catalog Number Finish Description
TL602E-10-WH White 10W 12V AC Electronic Driver/Transformer
TL602E-25-WH White 25W 12V AC Electronic Driver/Transformer
TL602E-60-WH White 60W 12V AC Electronic Driver/Transformer
