Juno UPLED30 30" 2-Lamp Pro-Series LED Undercabinet fixture
The Pro-Series LED modular series with integral electronic driver
operates 3000K LEDs for maintenance free 50,000 hour life using
1/6 the energy and virtually no heat when compared to halogen
& xenon. Pro-Series LED fixtures are optimized for fast permanent
installation, mounting either flush to the rear backsplash or to the front
lip of cabinetry to suit project conditions and homeowner preference.
Pro-Series LED fixtures are environmentally friendly and contain no
harmful mercury. 5-year limited warranty.
LEDs Utilizes warm-white 3000K LEDs tightly binned to within
2-step MacAdam ellipse for superb color consistency ï¿½ Light output
equivalent to Pro-Series Halogen & Pro-Series Xenon fixture series
ï¿½ Provides 50,000 hour service life.
Driver Integral electronic 120-volt constant current driver is accessible
without having to remove fixture ï¿½ Dimmable with most incandescent,
magnetic low voltage or electronic low voltage wall box dimmers
ï¿½ For a list of compatible dimmers, refer to next page.
Housing Slim 1ï¿½ profile ï¿½ Modular plug-together design
ï¿½ Extruded Aluminum ï¿½ Designer white, black, brushed bronze, or
Diffuser Clear prismatic tempered glass lens for maximum light
transmission ï¿½ Reverse-angled to minimize perceived brightness.
Switch Convenient integral On/Off rocker switch.
Labels UL Listed.
UPLED Series fixtures offer several convenient methods for installation
and can be installed as direct wire or portable luminaires. Fixtures may
be mounted flush to the backsplash or up against the front lip of the
cabinetry using captive mounting screws.
Direct Wire The UPLED14, UPLED22, and UPLED30 are optimized
with a center rear wiring access compartment and push-in electrical
connectors for quick electrical connection using non-metallic or
armored cable ï¿½ The UPLED14, UPLED22, and UPLED30 also feature
multiple off-center knockouts and are supplied with die cast fittings
for 3/8ï¿½ flexible metal conduit ï¿½ An optional direct-wire module
(ULH-DWM sold separately), supplied with a 36ï¿½ field-shortenable
jumper cord to bring power to the fixture, is also available to facilitate
code compliant installation of fixture at the front end of cabinetry
ï¿½ Please note that if direct wiring is required for the UPLED09, the
ULH-DWM must be utilized.
Portable To install the UPLED09, UPLED14, UPLED22, or UPLED30
as a portable fixture, use the optional 3-wire grounded cord & plug
(ULH-CP sold separately)
Electrically Connecting Multiple Fixtures Connect multiple fixtures
for up to 5 amps maximum combined operating current ï¿½ Fixtures may
be electrically joined together using either the straight joiner connector
supplied with each fixture or the optional JC3 jumper cords ï¿½ See
accessories table for lengths and colors. See engineering data table
for input current draw of each fixture size.
Dimmable with most standard incandescent, magnetic low voltage or electronic low voltage dimmers. Dimming range depends on dimmer
model. Compatible dimmers include but are not limited to the following Juno qualified dimmers listed below. Note: Due to the low wattage
of UPLED09, it is recommended to combine this luminaire on a dimmer with at least one additional luminaire for best dimming performance