Try Our New Website. Click Here * Under Construction *
Note: All orders with merchandise totaling less than $50.00 are charged a Minimum Order Fee of $10.00. It will automatically added to your S&H. Buy more, save more!
DUAL SERVICE RAISED FLOOR BOX
 "LEW RF9C DUAL SERVICE RAISED BOX CONCRETE FLOOR")
THE RF9C SERIES BOX is a dual service raised floor box. The box is constructed of 16
Ga. Galvanized steel and is supplied complete with 1/4" cast aluminum cover assembly. Box
supplied with two 1/2 �3/4" combination conduit knockouts at each end. RF9 series access
floor boxes are constructed with multiple compartments to suit application. Standard boxes
supplied with power plates and data/communication plates punched to accept specified
devices (see below). The cast aluminum cover can be supplied unpainted or polyester powder
coated�textured black is standard, but a wide range of other colors are available.
OPTIONS:
Boxes can be supplied pre-wired in a variety of configurations:
A. With plastic or rubber jacketed cord sets to molded U ground plugs (cord lengths as specified)
B. With armoured cable for customer hard wiring to under floor power source. (cord lengths as specified)
C. Using modular connectors and cord sets to customer specifications
D. With Tel/Data cord sets to customer specifications
LEW RF9C DUAL SRVC RAISED ACCESS FLOOR BOX
Catalog Number: RF9C
Item Description:
THE RF9C SERIES BOX is a dual service raised floor box. The box is constructed of 16 Ga. Galvanized steel and is supplied complete with 1/4" cast aluminum cover assembly
Power Device Plate Specifications
1=1 std Dupleax Cut Out
2=2 std Dupleax Cut Outs
3=1 Decora Cut Out
4=2 Decora Cut Out
Note: Decora cut out measure 1.3125" x 2.66"
Tel/Date Device Plate Specification
A=1 Decora Cut Out
B=2 Decora Cut Outs
C=1 RJ45 Cut Out
D=2 RJ45 Cut Outs
E=3 RJ45 Cut Outs
F=4 RJ45 Cut Outs
Standard Ordering Specifications
1- Specify box type [CF9C.]
2- Specify power device plate [e.g. CF9C2 = 2 std duplex cut outs.]
3- Specify Tel/Data device plate [e.g. CF9C2C = 2 standard duplex and 1 RJ45 cut out on Tel/Data side.] See details below.
Note: Decora cut out measure 1.3125" x 2.66" RJ45 cut outs measure .765" x .585"
OPTIONS:
Boxes can be supplied pre-wired in a variety of configurations:
A. With plastic or rubber jacketed cord sets to molded U ground plugs (cord lengths as specified)
B. With armoured cable for customer hard wiring to under floor power source. (cord lengths as specified)
C. Using modular connectors and cord sets to customer specifications
D. With Tel/Data cord sets to customer specifications
LEW RF9C DUAL SRVC RAISED ACCESS FLOOR BOX
Catalog Number: RF9C
Item Description:
THE RF9C SERIES BOX is a dual service raised floor box. The box is constructed of 16 Ga. Galvanized steel and is supplied complete with 1/4" cast aluminum cover assembly
Power Device Plate Specifications
1=1 std Dupleax Cut Out
2=2 std Dupleax Cut Outs
3=1 Decora Cut Out
4=2 Decora Cut Out
Note: Decora cut out measure 1.3125" x 2.66"
Tel/Date Device Plate Specification
A=1 Decora Cut Out
B=2 Decora Cut Outs
C=1 RJ45 Cut Out
D=2 RJ45 Cut Outs
E=3 RJ45 Cut Outs
F=4 RJ45 Cut Outs
Standard Ordering Specifications
1- Specify box type [CF9C.]
2- Specify power device plate [e.g. CF9C2 = 2 std duplex cut outs.]
3- Specify Tel/Data device plate [e.g. CF9C2C = 2 standard duplex and 1 RJ45 cut out on Tel/Data side.] See details below.
Note: Decora cut out measure 1.3125" x 2.66" RJ45 cut outs measure .765" x .585"
